Intellinet Network Solutions Indoor 1-Port Gigabit High-Power PoE+ Extender Repeater, Extends Range Beyond the 328 ft (100 m) Limit, Metal
This product is sold out and we do not know when we will be getting another shipment. We apologize for any inconvenience this may cause.
Check similar items above to see if a replacement product is available.
Product Description
Intellinet Network Solutions Indoor 1-Port Gigabit High-Power PoE+ Extender Repeater, Extends Range Beyond the 328 ft (100 m) Limit, Metal - Extend the range of a PoE connection!
The Intellinet 1-Port Gigabit High-Power PoE+ Extender Repeater, Model 560962, is designed to extend connection distances from a PoE source to an output device another 100 m (328 ft.) via Cat5e or Cat6 cable. You can cover even longer distances by cascading these extenders on a network. The PoE+ extender does not need any additional power supply, as it draws the power it needs from the PoE input.
Simple Installation
Simply connect the "PoE In" port with your PoE injector or PoE switch, and connect the "PoE Out" with the PoE device that you wish to connect; e.g., a VoIP phone or a PoE network camera. That's it. There is nothing to configure. It simply could not be any easier.
Reduce Wiring Costs
No need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Extender to the LAN switch port and use the existing Cat5 cabling to deliver DC power as well as transfer data.
Power over Ethernet 802.3at Compliant
The Intellinet 1-Port Gigabit High-Power PoE+ Extender Repeater supports the IEEE 802.3at protocol and is designed to forward data at Gigabit speeds and up to 30 watts of input power to a connected IEEE 802.3af- or IEEE 802.3at-compliant device. The cable length on both ends can be up to 100 meters (328 ft.), bringing the total distance to 200 m (656 ft.).
Cascading Power
You can daisy-chain multiple of the PoE extenders to increase the transmission distance even further. For each PoE extender added, you lose about 4 watts of usable PD power, but if you start with a PoE injector that outputs 30 watts of IEEE 802.3at power - for example, the Intellinet PoE injector (Model 560566) - then you still have 12.5 watts for your PoE device, 4 PoE extenders down the line and 500 meters (1640 ft.) away.
Product Specifications
-
Additional InformationIEEE 802.3af (Power over Ethernet) IEEE 802.3at (High-Power PoE+ Power over Ethernet) IEEE 802.3 (10Base-T Ethernet) IEEE 802.3ab (Gigabit Ethernet) IEEE 802.3u (100Base-TX Fast Ethernet) General Media support: 100Base-TX Cat5 UTP/STP RJ45, 8 pin 1000Base-T Cat5e UTP/STP RJ45, 8 pin Ports: 1 RJ45 10/100/1000 Mbps input port for 48V IEEE 802.3af/at-compliant signal 1 RJ45 10/100/1000 Mbps PoE output port Certifications: FCC Class A, CE Power Max PD output power 24.6 W when using one PoE extender @ 200 m (656 ft.) combined cable length 20 W when using two PoE extenders @ 300 m (984 ft.) combined cable length 16.2 W when using three PoE extenders @ 400 m (1312 ft.) combined cable length 12.5 W when using four PoE extenders @ 500 m (1640 ft.) combined cable length Input power: IEEE 802.3af/at compliant PSE
-
Brand NameManhattan
-
Height0.8"
-
Length4"
-
Limited Warranty3 Year
-
Manufacturer Part Number560962
-
Network (RJ-45)Yes
-
Package Contents1-Port Gigabit High-Power PoE+ Extender Repeater Instructions
-
Product MaterialMetal
-
Product Model560962
-
Product Name1-Port Gigabit High-Power PoE+ Extender Repeater
-
Product TypeNetwork Extender
-
Width1.2"