Tripp Lite by Eaton NetCommander 16-Port Cat5 KVM over IP Switch - 1 Remote + 1 Local User 1U Rack-Mount
- 16-port KVM switch provides control of computers/servers locally or via your network or the Internet
- Occupies just 1U of rack space
- Low-cost Cat5 cabling allows longer distances, reduces cable clutter
- Simultaneous support for 2 users - 1 local, 1 remote
Product Description
Tripp Lite by Eaton NetCommander 16-Port Cat5 KVM over IP Switch - 1 Remote + 1 Local User 1U Rack-Mount - Tripp Lite's B072-016-1-IP KVM Switch is the optimal solution for controlling up to 16 computers/servers locally, from across the room, down the street or around the globe on a network or the Internet.
This KVM switch can be accessed and controlled remotely, so there's no need to travel to the server room or network closet. A Java-based application allows access via web browser from any secure IP connection; a non-browser client that can bypass browser-related Java Security prompts is available.
The B072-016-1-IP uses inexpensive, user-supplied Cat5e/6/6a cabling with Server Interface Units (sold separately) so you can connect computers/servers located up to 100 ft. away from the switch. This switch features dual Ethernet ports; if one fails, the other takes over, keeping remote access uninterrupted. Users can switch easily between the 16 ports using an on-screen display (OSD), hotkey commands or a remote toolbar. Multi-level password protection prohibits unauthorized users from accessing connected computers, and a local user and a remote user can each log on and access different ports simultaneously.
Two serial ports allow control of serial-manageable devices such as IP PDUs, firewalls and routers; individual ports can be assigned to an IP PDU port to power on/off the server connected to that port. This KVM switch is compatible with Windows and Linux operating systems, and provides remote access using a Windows computer. It supports VGA video resolutions up to 1920 x 1080 @ 60 Hz. Heavy-duty steel housing stands up to frequent use.
Virtual Media allows an .iso file to be mounted to a target server and accessed as if it were stored directly on it. Virtual Media data transfer rates up to 12Mbps are supported when using a B078-101-USB2 Server Interface Unit. Other features include RADIUS and LDAP/S authentication, system-sent SNMP messaging and an event log that tracks logins, reboots and network setting changes.
Free NetCommander-AXS Management Software is available to access and control all of your Tripp Lite NetCommander IP KVM switches (B070 and B072 series). From a single interface, you can access server ports on any of your KVM switches, power cycle or power on/off outlets of IP PDUs and manage KVM settings. This software can be downloaded free of charge from the model support page for the B072-016-1-IP.
Features
Saves Space and Money
Mounts in a standard 19 in. rack
Inexpensive Cat5e/6/6a cabling lets you locate servers up to 100 ft. from the switch
Use a Server Interface Unit, B078-101-USB-1 (for USB) or B078-101-PS2 (for PS/2) with each server to be connected with Cat5 cable; use a B078-101-USB2 to support Virtual Media data transfer rates up to 12Mbps
To convert DisplayPort or HDMI computers to VGA, use Tripp Lite adapters P134-06N-VGA-V2 or P131-06N. Maximum video resolutions using adapters may vary.
IP Remote Access for Fewer Trips to the Server Room
Control this KVM switch over IP: remote access means there's no need to travel to the server room or network closet
Java-based application allows Windows computers to control a target server via web browser from any location over a secured IP connection
A non-browser client is available that allows Windows computers to remotely access the KVM without the need for a browser and without the need to install Java
1 local + 1 remote user can access different ports concurrently; up to 5 users can share a single remote session
Supports both IPv4 and IPv6
- 16-port KVM switch provides control of computers/servers locally or via your network or the Internet
- Occupies just 1U of rack space
- Low-cost Cat5 cabling allows longer distances, reduces cable clutter
- Simultaneous support for 2 users - 1 local, 1 remote
- Dual Ethernet ports assure uninterrupted remote access
- Quickly switches between sources without physical access
- Connect up to 16 computers to 1 local users
- Features 1920 x 1200 resolution
- Hot-pluggable USB interface for a quick connection
- The rack-mountable form factor provides convenient installation
Product Specifications
-
Brand NameTripp Lite by Eaton
-
Country of OriginTaiwan
-
Daisy Chain SupportedYes
-
Depth9"
-
Environmentally FriendlyYes
-
Form FactorRack-mountable
-
Graphic ModeUXGA
-
Height1.8"
-
Input Voltage120 V AC 230 V AC
-
Input Voltage Range120V AC to 230V AC
-
KVM TechnologyDigital
-
Limited Warranty3 Year
-
Manufacturer Part NumberB072-016-1-IP
-
Maximum Operating Distance100 ft
-
Maximum Video Resolution1920 x 1200
-
Network (RJ-45)Yes
-
Number of Computers Supported16
-
Number of Local Users Supported1
-
Number of Network (RJ-45) Ports20
-
Number of Remote Users Supported1
-
Number of USB Ports3
-
Number of VGA Ports1
-
Package ContentsNetCommander B072-016-1-IP 16-Port KVM Over IP Switch 16-Port NetCommander 1U Rackmount Cat5 KVM over IP Switch Rackmount Bracket kit 6ft Power Cord 6ft Serial Cable
-
Product LineNetCommander
-
Product ModelB072-016-1-IP
-
Product Name16-Port Cat5 1+1 User 1U Rack-Mount VGA USB KVM Switch with IP Remote Access
-
Product TypeKVM Switchbox
-
Rack Height1U
-
USBYes
-
VGAYes
-
Width17"