Tripp Lite by Eaton DVI/HDMI over IP Extender Receiver over Cat5/Cat6 RS-232 Serial and IR Control 1080p 60 Hz 328 ft. (100 m) TAA
- Compatible with B160-Series A/V over IP transmitters
- Display video from any source, analog or digital
- Supports video resolutions up to 1920 x 1080 (1080p) @ 60 Hz
- Scales up to multi-in, multi-out installation with network switch
Product Description
Tripp Lite by Eaton DVI/HDMI over IP Extender Receiver over Cat5/Cat6 RS-232 Serial and IR Control 1080p 60 Hz 328 ft. (100 m) TAA - The B160-100-HDSI HDMI Audio/Video with RS-232 Serial and IR Control over IP Receiver extends and distributes HDMI/DVI video(adapter cable included for connecting DVI display), RS-232 serial and IR(infrared) remote signals through a dedicated Ethernet network switch* located up to 328 feet(100 m) away. With an additional 328 feet between the switch and the transmitter(sold separately), the total maximum distance from source to display is 656 feet(200 m).
The B160-100-HDSI is designed for managed network switches with IGMP, which allow login and remote management via switch interface. You can connect up to 64 transmitters and 255 receivers in a single managed switch installation.**
The B160-100-HDSI supports video resolutions up to 1920 x 1080(1080p) at 60 Hz. It works with any analog or digital source, including DisplayPort and VGA. It extends IR control signals that control a source, such as a Blu-ray player, from a remote display, as well as RS-232 signals at serial baud rates up to 57600 Bps.
Compatible with Tripp Lite's B160-001-DPSI, B160-001-HDSI and B160-001-VSI transmitters.
*B160-Series designed for use with dedicated network switch. Connecting to a switch used with other networking equipment will result in degraded or non-functional performance.
**Unmanaged switch installations are limited to two transmitter units. Number of receivers is limited to number of ports remaining on unmanaged switch.
Features
Extends and Distributes HDMI/DVI A/V, Serial and IR Control Signals over Cat5/6 Cabling
Converts source video to IP-based signal transmitted to and distributed through network switch
Adapter cable included for connecting a DVI display
Extends signal up to 328 ft.(100 m) from switch
Can also connect directly to transmitter up to 328 ft. away
Designed for Managed Network Switches with IGMP
Allows login and remote management via switch interface
Works with any analog or digital source, including DisplayPort and VGA
Connect up to 64 transmitters and 255 receivers in single managed switch installation
Enhanced Technical Features
Supports video resolutions up to 1920 x 1080(1080p) @ 60 Hz
Uses H.264 video compression standard
Transmits on 20-60 kHz IR frequency
Extends IR control signals that control a source from a remote display
Supports RS-232 serial baud rates up to 57600 Bps
HDCP and 3D compatible when used with a DisplayPort or HDMI transmitter (not compatible with VGA transmitter)
Plug and Play Functionality
No software or drivers required
Hardware included for mounting on wall, rack or pole
Compatible with B160-001-DPSI, B160-001-HDSI and B160-001-VSI transmitters
TAA-Compliant
Compliant with the Federal Trade Agreements Act(TAA) for GSA Schedule purchases
- Compatible with B160-Series A/V over IP transmitters
- Display video from any source, analog or digital
- Supports video resolutions up to 1920 x 1080 (1080p) @ 60 Hz
- Scales up to multi-in, multi-out installation with network switch
- Plug and play-no software or drivers required
Product Specifications
-
Brand NameTripp Lite by Eaton
-
Connectivity TechnologyWired
-
Country of OriginTaiwan
-
Environmentally FriendlyYes
-
Form FactorPole-mountable Rack-mountable Wall Mountable
-
HDMI OutYes
-
Limited Warranty1 Year
-
Manufacturer Part NumberB160100HDSI
-
Maximum Operating Distance328.08 ft
-
Maximum Video Resolution1920 x 1440
-
Media Type SupportedTwisted Pair
-
Network (RJ-45)Yes
-
Number of HDMI Outputs1
-
Number of Network (RJ-45) Ports1
-
Number of Output Devices Supported1
-
Package ContentsB160-001-HDSI Video Extender Receiver External power supply w/NEMA 1-15P plug (Input: 100-240V, 50/60 Hz, 0.5A; Output: 5V, 2A) Plug Adapters for U.S., U.K., Europe and Australia IR-In Cable HDMI-to-DVI Adapter Cable Mounting Hardware Owner's Manual
-
Product ModelB160-100-HDSI
-
Product NameB160-001-HDSI Video Extender Receiver
-
Product TypeVideo Extender Receiver
-
Serial PortYes
-
Twisted Pair Cable StandardCategory 6