Ubiquiti PowerBeam ac PBE-2AC-400 IEEE 802.11ac 330 Mbit/s Wireless Bridge

2.40 GHz - 1 x Network (RJ-45) - PoE Ports - Pole-mountable
Product Number: IGRM5FU384
  • Extend your network to an additional building without digging trenches to lay expensive cables; simply use this wireless bridge to create a point-to-point Wi-Fi connectivity between the buildings
  • Ensure speedy data transfer of up to 330 Mbit/s with the IEEE 802.11ac wireless technology
  • Up to 10x faster than standard Ethernet connectivity for your wired network
  • With PoE Port, transfer data and power from a single cable to places where a power outlet is not present
More details
$122.00
Free Shipping Estimated Delivery
Favorite
Compare
Request Quote

Product Description

Ubiquiti PowerBeam ac PBE-2AC-400 IEEE 802.11ac 330 Mbit/s Wireless Bridge - Ubiquiti Networks launches the latest generation of airMAX CPE (Customer Premises Equipment), the PowerBeam 2AC, with dedicated Wi-Fi management.

Improved Noise Immunity

The PowerBeam 2AC directs RF energy in a tighter beamwidth. With the focus in one direction, the PowerBeam 2AC blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.

Integrated Design

Ubiquiti's InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses.

Featuring high performance and innovative design, the PowerBeam 2AC is versatile and cost-effective to deploy.
Software

airOS 8 is the revolutionary operating system for Ubiquiti airMAX ac products.

Powerful Wireless Features

High-performance airMAX ac CPE
airMAX ac Protocol Support
Long-Range Point-to-Point (PtP) Link Mode
Selectable Channel Width
PtP: 10/20/40 MHz
PtMP: 10/20/40 MHz Automatic Channel Selection
Transmit Power Control: Automatic/Manual
Automatic Distance Selection (ACK Timing)
Strongest WPA2 Security Usability Enhancements

airMagic Channel Selection Tool
Redesigned User Interface
Dynamic Configuration Changes
Instant Input Validation
HTML5 Technology Optimization for Mobile Devices
Detailed Device Statistics
Comprehensive Array of Diagnostic Tools, Including RF Diagnostics and airView Spectrum Analyzer
Advanced RF Analytics

airMAX ac devices feature a multi -radio architecture to power a revolutionary RF analytics engine.

An independent processor on the PCBA powers a second, dedicated radio, which persistently analyzes the full 2.4 GHz spectrum and every received symbol to provide you with the most advanced RF analytics in the industry.

Real-Time Reporting

airOS 8 displays the following RF information:

Persistent RF Error Vector Magnitude (EVM) constellation diagrams
Signal, Noise, and Interference (SNI) diagrams
Carrier to Interference-plus-Noise Ratio (CINR) histograms Spectral Analysis

airView allows you to identify noise signatures and plan your networks to minimize noise interference. airView performs the following functions:


Constantly monitors environmental noise
Collects energy data points in real -time spectral views
Helps optimize channel selection, network design, and wireless performance
In airView, there are three spectral views, each of which represents different data: waveform, waterfall, and ambient noise level.

airView provides powerful spectrum analyzer functionality, eliminating the need to rent or purchase additional equipment for conducting site surveys.

UNMS App

The PowerBeam 2AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.

Accessing airOS via Wi-Fi

The UNMS App provides instant accessibility to the airOS configuration interface and can be downloaded from the App Store (iOS) or Google Play (Android). UNMS allows you to set up, configure, and manage the PowerBeam 2AC and offers various configuration options once you're connected or logged in.

  • Extend your network to an additional building without digging trenches to lay expensive cables; simply use this wireless bridge to create a point-to-point Wi-Fi connectivity between the buildings
  • Ensure speedy data transfer of up to 330 Mbit/s with the IEEE 802.11ac wireless technology
  • Up to 10x faster than standard Ethernet connectivity for your wired network
  • With PoE Port, transfer data and power from a single cable to places where a power outlet is not present
Guides & Information

Product Specifications

  • Brand Name
    Ubiquiti
  • Depth
    16.5"
  • Environmental Certification
    RoHS
  • Environmentally Friendly
    Yes
  • Ethernet Technology
    Gigabit Ethernet
  • Form Factor
    Pole-mountable
  • Frequency Band
    2.40 GHz
  • Height
    11.4"
  • Limited Warranty
    1 Year
  • Manufacturer Part Number
    PBE-2AC-400-US
  • Number of Network (RJ-45) Ports
    1
  • Package Contents
    2.4 GHz High-Performance AirMAX Ac Bridge with Dedicated Wi-Fi Management Pole-Mounting Kit 0.5A Gigabit PoE Adapter
  • PoE (RJ-45) Port
    Yes
  • Product Line
    PowerBeam ac
  • Product Model
    PBE-2AC-400
  • Product Name
    2.4 GHz High-Performance AirMAX Ac Bridge with Dedicated Wi-Fi Management
  • Product Type
    Wireless Bridge
  • Width
    16.5"
  • Wireless LAN Standard
    IEEE 802.11ac
  • Wireless Transmission Speed
    330 Mbit/s

Customer Reviews

Be the first to write a review

Questions & Answers