Crucial 4GB (1 x 4 GB) DDR3 SDRAM Memory Module
- 4 GB memory allows you to have more programs open at a time
- 240-pin-pin DDR3 SDRAM interface multiplexes 2-bit data from memory cell and I/O buses to minimize processor idle time and enhance your computer's performance
- Up to 1600 MHz speed with CL11 latency for smooth computer performance
This product is sold out and we do not know when we will be getting another shipment. We apologize for any inconvenience this may cause.
Check similar items above to see if a replacement product is available.
Product Description
Crucial 4GB (1 x 4 GB) DDR3 SDRAM Memory Module - DDR3L 240-pin DIMM
Desktop modules that operate at speeds up to 1600 MT/s and have a CL11 latency. It is dual voltage and can operate at 1.35V or 1.5V. It is Unbuffered and is non-ECC. It conforms to the industry standard UDIMM layout of 240 pins and is compatible with computers that take DDR3 UDIMM memory.
A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other.
Each 240-pin DIMM provides a 64-bit data path (72-bit for ECC or registered or Fully Buffered modules).
To use DDR3 memory, your system motherboard must have 240-pin DIMM slots and a DDR3-enabled chipset. This is because a DDR3 SDRAM DIMM will not fit into a standard DDR2 DIMM socket or a DDR DIMM socket.
The number of black components on a 240-pin DIMM can vary, but it always has 120 pins on the front and 120 pins on the back, for a total of 240. 240-pin DIMMs are approximately 5.25 inches long and 1.18 inches high, though the heights can vary. While 240-pin DDR3 DIMMS, 240-pin DDR2 DIMMs, 184-pin DDR DIMMs, and 168-pin DIMMs are approximately the same size, 240-pin DIMMs and 184-pin DIMMs have only one notch within the row of pins.
- 4 GB memory allows you to have more programs open at a time
- 240-pin-pin DDR3 SDRAM interface multiplexes 2-bit data from memory cell and I/O buses to minimize processor idle time and enhance your computer's performance
- Up to 1600 MHz speed with CL11 latency for smooth computer performance
Product Specifications
-
Brand NameCrucial
-
CAS LatencyCL11
-
CompatibilityAsus M5A78L-M LX V2 Motherboard
-
Device SupportedDesktop PC
-
Error CheckingNon-ECC
-
Form FactorDIMM
-
Manufacturer Part NumberCT51264BD160BJ
-
Memory Size4 GB
-
Memory Speed1600 MHz
-
Memory StandardDDR3-1600/PC3-12800
-
Memory TechnologyDDR3 SDRAM
-
Memory Voltage1.35 V
-
Number of Modules1 x 4GB
-
Number of Pins240-pin
-
Product Name4GB (1 x 4 GB) DDR3 SDRAM Memory Module
-
Product TypeRAM Module
-
Signal ProcessingUnbuffered