Eaton 5P UPS 850VA 600W 230V Line-Interactive UPS, C14 Input, 6 C13 Outlets, True Sine Wave, Cybersecure Network Card Option, Tower
- Keeps equipment running during outages to allow time for file saves and safe shutdown
- Provides 20% more wattage compared to traditional UPS systems to protect devices
- Exclusive ABM technology with 3-stage charging increases internal battery life by 50%
- 5-button graphical LCD offers critical UPS data and load status at a glance
This product is sold out and we do not know when we will be getting another shipment. We apologize for any inconvenience this may cause.
Check similar items above to see if a replacement product is available.
Product Description
Eaton 5P UPS 850VA 600W 230V Line-Interactive UPS, C14 Input, 6 C13 Outlets, True Sine Wave, Cybersecure Network Card Option, Tower - 850VA/600W/230V Battery Backup for Network Closets and Small Data Centers
This 5P line-interactive UPS system provides reliable battery backup for small business, education, retail, financial or healthcare networking components, including servers, VoIP phones, data storage and PoE switches. The 5P850G protects connected devices by providing 20 percent more wattage compared to traditional UPS systems.
Reliable Battery Backup Keeps You Operational Through Power Outages
Valve regulated lead acid (VRLA) battery modules allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. Exclusive ABM technology increases battery life by 50 percent and closely monitors battery health to provide advanced notice when batteries need replacing.
Optional Gigabit Network Interface Offers 24/7 Remote Access
The NETWORK-M2 Gigabit network card (sold separately) enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. UPS firmware can also be flashed remotely through the NETWORK-M2 without dropping the load, so you don't have to plan for downtime. The card meets both UL 2900-1 and IEC 62443-4-2 standards for cybersecurity, which were developed to address the vulnerability of connected devices to known malware/exploits and to protect business from these risks. An optional Environmental Monitoring Probe Gen 2 (EMPDT1H1C2, sold separately) provides a variety of environmental monitoring capabilities, including temperature and humidity conditions.
C13 Outlets Protect Your Connected Components
Six managed C13 outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Three outlets are grouped into two load banks that let you shed non-critical loads to extend runtime for critical loads.
LCD Interface Keeps You Informed at a Glance
The five-button graphical LCD provides useful information about the UPS itself, load status,
events, measurements and settings. To save energy, the LCD switches to the screen saver after five minutes of inactivity. The backlight LCD automatically dims after 10 minutes of inactivity.
Advanced Communications Ports Allow for Automatic Saves and Shutdowns
RS-232 and USB ports connect to a serial-enabled or USB-enabled device for a variety of communication options (cables are included). The RPO/ROO connector permits emergency shutdown or remote restart of all connected equipment. By adding the optional RELAY-MS interface card (sold separately), a dry-contact relay port can be programmed through the LCD to provide reliable communications to automation and industrial components.
- Keeps equipment running during outages to allow time for file saves and safe shutdown
- Provides 20% more wattage compared to traditional UPS systems to protect devices
- Exclusive ABM technology with 3-stage charging increases internal battery life by 50%
- 5-button graphical LCD offers critical UPS data and load status at a glance
- Optional NETWORK-M2 Gigabit network card enables full remote access and control
- Experience higher efficiency with lower energy cost
- Keep your sensitive devices powered with a backup of up to 4 minute at full load
- Prevent critical data loss by staying powered during a blackout with up to 600 W load capacity
- 850 VA load capacity provides sufficient backup during power failures
- Lead Acid battery chemistry to better suit your requirements with maximum productivity
- IEC 60320 C14 plug/connector type for convenient usage with added dependability
- IEC 60320 C13 receptacle type offers maximum safety, convenience, and increased usability
- 220 V AC input voltage for optimal performance with maximum usability
- 240 V AC output voltage for maximum dependability and added productivity
- Tower form factor requires minimal configuration and can be easily customized and upgraded to ensure maximum efficiency
Product Specifications
-
Battery ChemistryLead Acid
-
Brand NameEaton
-
Certifications & StandardsUL 1778 UL497A cULus CE IEC 62040-2 C1-C2 EN 55024 CISPR22 Class B FCC part 15 Class B
-
Country of OriginPhilippines
-
Depth13.6"
-
Environmental CertificationRoHS
-
Environmentally FriendlyYes
-
Form FactorTower
-
Height9.1"
-
Hot SwappableYes
-
Input Voltage220 V AC
-
Limited Warranty3 Year
-
Load Capacity (VA)850 VA
-
Load Capacity (Watt)600 W
-
Manufacturer Part Number5P850G
-
Network (RJ-45)Yes
-
Output Voltage132 V AC 208 V AC 220 V AC 230 V AC 240 V AC
-
Package ContentsUser Manual CD Intelligent Power Software Suite CD Quick Start Guide USB Cable RS-232 Serial Cable 5P Tower UPS 2 x IEC-to-IEC Jumper Cables
-
Plug/Connector TypeIEC 60320 C14
-
Product Model5P
-
Product Name5P Tower UPS
-
Product TypeLine-interactive UPS
-
Receptacle Detail6 x IEC 60320 C13
-
Receptacle TypeIEC 60320 C13
-
Software IncludedIntelligent Power Software Suite
-
USBYes
-
Width5.9"