Tripp Lite by Eaton UPS SmartPro 230V 2.2kVA 1.92kW Line-Interactive Sine Wave UPS 2U Extended Run Network Card Options LCD USB DB9
- 2.2kVA / 2200VA / 1920W line interactive 2U rack/tower UPS, Sine Wave
- 230V output, Corrects brownouts and overvoltages from 158V to 278V
- 0.9 Power Factor, Interactive LCD interface
- Extended runtime options up to 1600W
Product Description
Tripp Lite by Eaton UPS SmartPro 230V 2.2kVA 1.92kW Line-Interactive Sine Wave UPS 2U Extended Run Network Card Options LCD USB DB9 - Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Tripp Lite's unique configuration excels in exceptionally poor-power environments with two separate levels of voltage boost to correct both slight undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 98% line-mode efficiency offers reduced heat emissions and operating costs. Network management interfaces support communications via USB, RS-232 and optional network management card option. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. PowerAlert UPS monitoring software is available via free download. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.
- 2.2kVA / 2200VA / 1920W line interactive 2U rack/tower UPS, Sine Wave
- 230V output, Corrects brownouts and overvoltages from 158V to 278V
- 0.9 Power Factor, Interactive LCD interface
- Extended runtime options up to 1600W
- 4 post compatible mounting accessories
- 98% line-mode efficiency, 2 switched load banks
- USB, RS232, EPO and slot for SNMPWEBCARD option
- 230V C20 inlet, 8 C13 outlets
- Experience higher efficiency with lower energy cost
- Keep your sensitive devices powered with a backup of up to 5 minute at full load
- 1920 W load capacity - backup power for your valuable electronics
- 2200 VA load capacity - work without any interruption during power outages
- EMI protection type provides optimal power supply output with added usability
- 4.50 Hour typical battery recharge time to allow optimal performance for longer hours with added efficiency
- Replaceable battery for maximum feasibility and better usability
- Lead Acid battery chemistry for your convenience and better usability
- IEC 60320 C20 plug/connector type for a secure, feasible operation
- IEC 60320 C13 receptacle type offers maximum safety, convenience, and increased usability
Product Specifications
-
AVRYes
-
Additional InformationCustomized load management receptacles: 3 load banks (1 outlet per bank) that support load shedding and remote reboot on demand of locked network devices. Controllable via PowerAlert software to automatically switch off optional loads, like monitors, to increase available runtime for servers and other critical devices Switches: 2 front panel-mounted push-button switches for system enable, self-test and alarm cancel functions. Rear: set of input voltage dip switches to set unit to actual input voltage. Battery charge level dip switch to adjust UPS system's battery charge rate
-
AlarmPower Failure Remote Shutdown UPS StartUp Low Battery Overload UPS Fault
-
Application/UsageNetwork Server Telecommunication
-
Battery ChemistryLead Acid
-
Brand NameTripp Lite by Eaton
-
Certifications & StandardsCE/IEC 62040 FCC Class A (Emissions) GOST SASO TUV w/GS mark
-
Circuit BreakerYes
-
Country of OriginChina
-
DC System Voltage48 V DC
-
Depth19.5"
-
EMI/RFI Noise FilterYes
-
EPO PortYes
-
Emergency Power OFFYes
-
Energy SavingGreater than 95% efficiency - GREEN UPS; Individually controllable load banks
-
Environmentally FriendlyYes
-
Form FactorRack/Tower
-
Height3.5"
-
Hot SwappableYes
-
Input Current10.70 A
-
Input Voltage230 V AC
-
Limited Warranty2 Year
-
Load Capacity (VA)2200 VA
-
Load Capacity (Watt)1920 W
-
Manufacturer Part NumberSMX2200XLRT2U
-
Maximum Operating Temperature104°F (40°C)
-
Network ManagementSNMP Manageable
-
Output Frequency60 Hz
-
Output Voltage230 V AC 220 V AC 240 V AC
-
Package Contents4 post rackmount installation kit Set of 3 C13/C14 power cables SmartPro SMX2200XLRT2U 2200VA Tower/Rack-mountable UPS Instruction manual USB, Serial & EPO cabling
-
PhaseSingle Phase
-
Plug/Connector TypeIEC 60320 C20
-
Product LineSmartPro
-
Product ModelSMX2200XLRT2U
-
Product NameSmartPro SMX2200XLRT2U 2200VA Tower/Rack-mountable UPS
-
Product TypeLine-interactive UPS
-
Protection TypeEMI RFI
-
Rack Height2U
-
Receptacle Detail8 x IEC 60320 C13
-
Receptacle TypeIEC 60320 C13
-
Replaceable BatteryYes
-
Sound Emission (A-Weighted)45 dB(A)
-
Status IndicatorsFront panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options
-
Storage Temperature5°F (-15°C) - 122°F (50°C)
-
Surge Energy Rating350 J
-
Thermal Dissipation47.18 W
-
Transfer Time6 ms
-
Typical Battery Recharge Time4.50 Hour
-
USBYes
-
USB (HID Compliant) PortYes
-
Waveform TypePure Sine Wave
-
Width17.5"