APC by Schneider Electric Switched Rack 32-Outlet PDU
- Electric power fitted to racks of computers and networking equipment within a data center
- With a built-in digital current meter avoid potential overloads via switched PDUs
- IEC 60320 C13 receptacle type to ensure maximum dependability and optimal performance
- IEC 60309 3P+PE 60A plug/connector type for efficient connectivity and feasible power output
This product is sold out and we do not know when we will be getting another shipment. We apologize for any inconvenience this may cause.
Check similar items above to see if a replacement product is available.
Product Description
APC by Schneider Electric Switched Rack 32-Outlet PDU - APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.
- Electric power fitted to racks of computers and networking equipment within a data center
- With a built-in digital current meter avoid potential overloads via switched PDUs
- IEC 60320 C13 receptacle type to ensure maximum dependability and optimal performance
- IEC 60309 3P+PE 60A plug/connector type for efficient connectivity and feasible power output
- 230 V AC input voltage for better reliance and maximum dependability
- 208 V AC output voltage for better reliance and maximum usability
Product Specifications
-
Brand NameAPC by Schneider Electric
-
Depth2"
-
Environmentally FriendlyYes
-
Height72"
-
Input Current60 A
-
Input Voltage230 V AC
-
Limited Warranty2 Year
-
ManagementSNMP Telnet
-
Manufacturer Part NumberAP8966
-
Mount TypeRack-mountable
-
Output Voltage208 V AC
-
Package ContentsSwitched Rack 32-Outlet PDU Installation guide Safety guide Rack mounting brackets Serial configuration cable
-
Plug/Connector Detail1 x IEC 60309 3P+PE 60A
-
Plug/Connector TypeIEC 60309 3P+PE 60A
-
Power Rating (VA)17.30 kVA
-
Product LineSwitched Rack
-
Product NameSwitched Rack 32-Outlet PDU
-
Product TypePDU
-
Protection TypeOverload Protection
-
Rack Height0U
-
Receptacle Detail12 x IEC 60320 C19 20 x IEC 60320 C13
-
Receptacle TypeIEC 60320 C13 IEC 60320 C19
-
Width2.2"