Tripp Lite by Eaton PDU 2.9kW Single-Phase Switched Automatic Transfer Switch PDU 2 120V L5-30P Inputs 24 5-15/20R & 1 L5-30R Outputs 2U TAA
- Single phase 30A 120V Auto Transfer Switch / ATS PDU; Highly reliable Solid State Switching
- Enables redundant A/B power option for non-redundant network devices
- Built-in LX Platform Network Interface
- 2U rackmount, 2 L5-30P inputs, 25 switched outlets (24 5-15/20R, 1 L5-30R)
Product Description
Tripp Lite by Eaton PDU 2.9kW Single-Phase Switched Automatic Transfer Switch PDU 2 120V L5-30P Inputs 24 5-15/20R & 1 L5-30R Outputs 2U TAA - Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Highly reliable solid-state switching between primary and secondary inputs occurs in 1-5 milliseconds. Switched PDU features include individually controllable output receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant, hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability. Built-in LX Platform network management interface card. The Java-free LX Platform HTML5-based network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.
- Single phase 30A 120V Auto Transfer Switch / ATS PDU; Highly reliable Solid State Switching
- Enables redundant A/B power option for non-redundant network devices
- Built-in LX Platform Network Interface
- 2U rackmount, 2 L5-30P inputs, 25 switched outlets (24 5-15/20R, 1 L5-30R)
- Individually switched outlets and built-in network interface enables remote control and monitoring
- Digital meter reports voltage, kW load level and output amperage in 4 load segments
- TAA Compliant
- A device fitted with multiple outputs for the distribution of electric power
- With switched PDU, remotely monitor, connect or disconnect data center loads
- NEMA 5-15/20R receptacle type to ensure maximum usability and reliable power output
- NEMA L5-30P plug/connector type for efficient connectivity and feasible power output
- 120 V AC input voltage for better reliance and maximum dependability
- 120 V AC output voltage for maximum dependability and added productivity
Product Specifications
-
Brand NameTripp Lite by Eaton
-
Country of OriginTaiwan
-
Depth12.5"
-
Environmentally FriendlyYes
-
Height3.5"
-
Input Voltage120 V AC
-
Input Voltage Range100 V AC - 127 V AC
-
Limited Warranty2 Year
-
ManagementProtocols: FTP SSH NTP DHCP HTTP SMTP Telnet HTTPS BOOTP SNMPv1 SNMPv2
-
Manufacturer Part NumberPDUMH30ATNET
-
Mount TypeRack-mountable
-
Mounting OrientationHorizontal
-
Output Voltage120 V AC
-
Package ContentsSwitched PDUMH30ATNET 25-Outlets PDU Rackmount Installation Brackets Cable Retention Plates 24 Cable Ties User Manual
-
Plug/Connector Detail2 x NEMA L5-30P
-
Plug/Connector TypeNEMA L5-30P
-
Product ModelPDUMH30ATNET
-
Product NameSwitched PDUMH30ATNET 25-Outlets PDU
-
Product SeriesSwitched
-
Product TypePDU
-
Protection TypeOverload Protection
-
Rack Height2U
-
Receptacle Detail1 x NEMA L5-30R 24 x NEMA 5-15/20R
-
Receptacle TypeNEMA 5-15/20R NEMA L5-30R
-
Width17.5"