Tripp Lite by Eaton TAA-Compliant SmartPro 120V 3kVA 2.25kW Line-Interactive Sine Wave UPS, 2U Rack/Tower, Extended Run, Pre-Installed WEBCARDLX Network Interface, LCD, USB, DB9 Serial - Battery Backup

Tripp Lite by Eaton TAA-Compliant SmartPro 120V 3kVA 2.25kW Line-Interactive Sine Wave UPS, 2U Rack/Tower, Extended Run, Pre-Installed WEBCARDLX Network Interface, LCD, USB, DB9 Serial - Battery Backup - Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Tripp Lite's unique configuration excels in exceptionally poor-power environments with two separate levels of voltage boost to correct both slight undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 98% line-mode efficiency offers reduced heat emissions and operating costs. Network management interfaces support communications via USB port, DB9 serial port and pre-installed WEBCARDLX network management interface card.

The Java-free HTML5-based WEBCARDLX interface enables full remote access for site power and UPS status monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.

HID-compliant USB port enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. PowerAlert UPS monitoring and auto-shutdown software is available via free download. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.

• Federal Trade Agreements Act / TAA Compliant for GSA Schedule purchases
• 3kVA / 3000VA / 2250W line interactive 2U rack/tower UPS
• 120V nominal output during brownouts to 83V and overvoltages to 145V
• Interactive LCD, USB, RS232, EPO and Pre-installed SNMPWEBCARD interface
• Hot-swap batteries, 98% efficiency, Sine wave output, 2 switchable load banks
• NEMA L5-30P input, 8 NEMA 5-15/20R & 1 L5-30R outlets
• Experience higher efficiency with lower energy cost
• Up to 3.50 minute runtime on full load to preserve critical data from power shortage interruptions
• 2250 W load capacity - backup power for your valuable electronics
• 3000 VA load capacity - work without any interruption during power outages
• EMI protection type provides optimal power supply output with added usability
• NEMA L5-30P plug/connector type for a secure, feasible operation
• NEMA 5-15/20R receptacle type provides secure, reliable connection with added productivity
• 120 V AC input voltage for better reliance and maximum dependability
• 120 V AC output voltage for better reliance and maximum usability
• Tower form factor is ideal for running internal applications, serving public websites or storing sensitive customer data with maximum productivity