Eaton 9PX 6000VA 5400W 208V Online Double-Conversion UPS - L6-30P, 2 L6-20R, 2 L6-30R, Hardwired Output, 10 ft. Input Cord, Cybersecure Network Card, Extended Run, 3U - Battery Backup
- Keeps equipment running during outages to allow time for file saves and safe shutdown
- Included NETWORK-M2 Gigabit network card enables full remote access and control
- Exclusive ABM technology with 3-stage charging increases internal battery life by 50%
- Interactive LCD interface keeps you updated on critical load information in real time
This product is sold out and we do not know when we will be getting another shipment. We apologize for any inconvenience this may cause.
Check similar items above to see if a replacement product is available.
Eaton 9PX 6000VA 5400W 208V Online Double-Conversion UPS - L6-30P, 2 L6-20R, 2 L6-30R, Hardwired Output, 10 ft. Input Cord, Cybersecure Network Card, Extended Run, 3U - Battery Backup - 6kVA/5.4kW/208V Battery Backup for IT Installations and Edge Networks This 9PX rack-mount online double-conversion UPS system provides reliable battery backup and AC power protection against blackouts, brownouts, surges and line noise that can damage valuable IT equipment or destroy data. The 9PX6K-10 is superlative power management for education, commercial, financial or healthcare networking components, including Cisco switches and servers. Expandable Internal Battery Backup Keeps You Operational Through Power Outages The field-replaceable, hot-swappable valve regulated lead acid (VRLA) battery modules allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. Exclusive ABM technology increases battery life by 50 percent and closely monitors battery health to provide advanced notice when batteries need replacing. You can also connect up to four extended battery modules (9PXEBM180RT, sold separately) for hours of extended runtime. Included Gigabit Network Interface Offers 24/7 Remote Access The NETWORK-M2 Gigabit network card enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. UPS firmware can also be flashed remotely through the NETWORK-M2 without dropping the load, so you don't have to plan for downtime. The card meets both UL 2900-1 and IEC 62443-4-2 standards for cybersecurity, which were developed to address the vulnerability of connected devices to known malware/exploits and to protect business from these risks. The optional Environmental Monitoring Probe Gen 2 (EMPDT1H1C2, sold separately) provides a variety of environmental monitoring capabilities, including temperature and humidity conditions. NEMA Outlets Protect Your Connected Components Two L6-20R and two L6-30R managed outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. The 9PX6K-10 also supports hardwired output. Rotating LCD Interface Keeps You Informed at a Glance The front-panel LCD provides control settings and critical information to help diagnose any issues. The interface rotates to accommodate both rack-mount and tower configurations, and it tilts up to 45 degrees for more comfortable viewing.
- Keeps equipment running during outages to allow time for file saves and safe shutdown
- Included NETWORK-M2 Gigabit network card enables full remote access and control
- Exclusive ABM technology with 3-stage charging increases internal battery life by 50%
- Interactive LCD interface keeps you updated on critical load information in real time
- Optional extended battery modules allow extended runtime to keep equipment powered
- Offers power supply with zero transfer time taken to the battery and proves ideal for voltage sensitive equipments
- 5400 W load capacity - backup power for your valuable electronics
- 6000 VA load capacity provides sufficient backup during power failures
- Replaceable battery for reliable output for prolonged usage with maximum efficiency
- Lead Acid battery chemistry for your convenience and better usability
- NEMA L6-30P plug/connector type for a secure, feasible operation
- NEMA L6-20R receptacle type offers maximum safety, convenience, and increased usability
- Double Conversion Online UPS with it application/usage to ensure maximum dependability and optimal performance
- 120 V AC input voltage for better reliance and maximum dependability
- 200 V AC output voltage for optimal performance with maximum feasibility
-
Application/UsageEdge Computing Healthcare Industrial Automation System IT Medical University
-
Battery ChemistryLead Acid
-
Brand NameEaton
-
Country of OriginUnited States
-
Depth28.4"
-
Form FactorRack/Tower
-
Height5.1"
-
Hot SwappableYes
-
Input Frequency60 Hz
-
Input Voltage120 V AC 230 V AC
-
Limited Warranty3 Year
-
Load Capacity (VA)6000 VA
-
Load Capacity (Watt)5400 W
-
Manufacturer Part Number9PX6K-10
-
Network (RJ-45)Yes
-
Network ManagementNetwork-M2 Card
-
Output Voltage200 V AC 208 V AC 220 V AC 230 V AC 240 V AC
-
Package Contents9PX UPS Gigabit Network Card (Network-M2) 4-post Rail Kit User Manual Quick Start Guide Tower Pedestals Intelligent Power Software Suite CD RS-232 Serial Cable USB Cable Cable Gland for Hardwire Connection Phillips Head Screw Driver
-
Plug/Connector TypeNEMA L6-30P
-
Product ColorBlack Silver
-
Product Name9PX UPS
-
Product Series9PX
-
Product TypeDouble Conversion Online UPS
-
Rack Height3U
-
Receptacle Detail2 x NEMA L6-20R 2 x NEMA L6-30R
-
Receptacle TypeHardwired NEMA L6-20R NEMA L6-30R
-
Replaceable BatteryYes
-
Serial PortYes
-
Sound Emission (A-Weighted)45 dB(A)
-
Status IndicatorsGraphical Display
-
USB (HID Compliant) PortYes
-
Waveform TypeSine Wave
-
Width17.3"