Tripp Lite by Eaton 1 x 2 HDMI over Cat5/6 Extender Kit, Box-Style Transmitter/Receiver for Video/Audio, Up to 150 ft. (45 m), TAA
- Supports high-definition video resolutions up to 1080p (60 Hz)
- Supports stereo and 7.1-channel surround sound audio
- Works with all operating systems and HDMI video sources
- Plug and play-no software or drivers to install
This product is sold out and we do not know when we will be getting another shipment. We apologize for any inconvenience this may cause.
Check similar items above to see if a replacement product is available.
Product Description
Tripp Lite by Eaton 1 x 2 HDMI over Cat5/6 Extender Kit, Box-Style Transmitter/Receiver for Video/Audio, Up to 150 ft. (45 m), TAA - The B126-2A1 HDMI over Cat5/Cat6 Extender Kit includes a transmitter unit and a receiver unit that work in tandem to extend an HDMI signal to two projectors, monitors or televisions. The kit is ideal for digital signs, trade shows, presentations, classrooms, churches, retail settings and other applications where the video source is located farther than conventional cables allow or that require multiple displays connected to one source.
HDMI cable (see Tripp Lite's P568-Series) connects the local monitor and the audio/video source to the transmitter's HDMI ports and two monitors to the receiver. Cat5e/6 cable (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series) connects the two units.
The B126-2A1 can extend a 1080i (60 Hz) signal up to 200 feet, a 1080p (60 Hz) signal up to 150 feet and a 3D signal up to 125 feet. You can connect up to three B126-110 remote repeaters in the chain for a maximum of six HDMI displays and full signal extension of 700 feet (1080i), 500 feet (1080p) or 400 feet (3D).
In addition to crystal-clear video, the B126-2A1 delivers full, rich stereo and 7.1-channel surround sound (multi-channel or PCM) audio. Built-in equalization control lets you fine-tune the image quality at each remote display. Supports 24-bit True Color (8 bits per channel) and HDCP compatibility. Easy to set up with no software or drivers to install. Mounts to a wall, rack or pole using the included hardware.
Features
Extends High-Definition Signals
Extends a 1080i (60 Hz) signal up to 200 ft., a 1080p (60 Hz) signal up to 150 ft. and a 3D signal up to 125 ft.
Connect up to 3 B126-110 remote repeaters to the chain for maximum signal range of 700 feet (1080i), 500 feet (1080p) and 400 feet (3D)
Transmitter and receiver connect with one Cat5e/6 cable (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series)
Supports the Latest Video and Audio Resolutions
Works with all operating systems and HDMI video sources
Supports HD resolutions up to 1080p (60 Hz)
Supports stereo and 7.1-channel surround sound (multi-channel or PCM) audio
Supports 24-bit True Color (8 bits per channel) and HDCP
Built-in equalization control lets you adjust the image on the local monitor
Easy to Set Up and Use
Plug-and-play engineering-no software or drivers to download and install
Units connect quickly to monitors with HDMI cable, such as Tripp Lite's P568-Series
LEDs indicate at a glance when the unit is receiving power and a signal from the previous link in the chain
Included mounting hardware lets you install the units on a wall, rack or pole
TAA-Compliant
Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
- Supports high-definition video resolutions up to 1080p (60 Hz)
- Supports stereo and 7.1-channel surround sound audio
- Works with all operating systems and HDMI video sources
- Plug and play-no software or drivers to install
- Built-in equalization control lets you adjust monitor image
- Video Extender Transmitter/Receiver provides efficient and feasible audio/video transmission, decoding, and extending
- 1920 x 1080 maximum video resolution for a vivid, crystal clear display with added productivity
- HDMI out enables you to transfer data from your devices to video extender transmitter/receiver with added efficiency
- The B126-2A1 video extender transmitter/receiver provides plenty of freedom with wired connectivity
- 1 input devices supported to better accommodate your specific requirements
- 2 output devices supported for maximum feasibility and usage convenience
- 200 ft maximum operating distance to allow efficient coverage and maximum usability
- Full HD graphics mode for stunning, lively video quality
- Rack-mountable form factor for your convenience and simplicity of usage
Product Specifications
-
Brand NameTripp Lite by Eaton
-
Connectivity TechnologyWired
-
Country of OriginTaiwan
-
Environmental ComplianceRestriction of Hazardous Substances (RoHS)
-
Environmentally FriendlyYes
-
Form FactorPole-mountable Rack-mountable Wall Mountable
-
Graphics ModesFull HD
-
HDMI InYes
-
HDMI OutYes
-
Limited Warranty1 Year
-
Manufacturer Part NumberB126-2A1
-
Maximum Operating Distance200 ft
-
Maximum Video Resolution1920 x 1080
-
Media Type SupportedTwisted Pair
-
Network (RJ-45)Yes
-
Number of HDMI Inputs1
-
Number of HDMI Outputs3
-
Number of Input Devices Supported1
-
Number of Network (RJ-45) Ports2
-
Number of Output Devices Supported2
-
Package ContentsB126-2A1 Kit ( Transmitter And Receiver ) External Power Supply (Input: 100-240V) Mounting Hardware Screwdriver For Equalization Adjustment Owner'S Manual
-
Product ColorBlack
-
Product ModelB126-2A1
-
Product NameB126-2A1 Video Extender Transmitter/Receiver
-
Product TypeVideo Extender Transmitter/Receiver
-
Twisted Pair Cable StandardCategory 6