Loading...
Pinch to zoom
Crucial 4GB DDR2 SDRAM Memory Module
Product Number: SYNX3173777
Sold Out
This product is sold out and we do not know when we will be getting another shipment. We apologize for any inconvenience this may cause.
Check similar items above to see if a replacement product is available.
Crucial 4GB DDR2 SDRAM Memory Module
4GB (2 x 2GB) - 800MHz DDR2-800/PC2-6400 - Non-ECC - DDR2 SDRAM - 200-pin SoDIMM
Description:
A small outline dual inline memory module (SODIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). SODIMMs get their name because they are smaller and thinner than regular DIMMs. The gold pins on the bottom of the SODIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a SODIMM are not connected.
200-pin SODIMMs are used to provide DDR and DDR2 SDRAM memory for notebook computers. 200-pin SODIMMs are available in PC2700 DDR SDRAM, PC3200 DDR SDRAM, DDR2 PC2-6400 SDRAM, DDR2 PC2-5300 SDRAM, DDR2 PC2-4200 SDRAM and DDR2 PC2-3200 SDRAM. To use DDR or DDR2 memory, your system motherboard must have 200-pin SODIMM slots and a DDR- or DDR2-enabled chipset. A DDR or DDR2 SODIMM will not fit into a standard SDRAM SODIMM socket. (Information about which memory technology your system uses is included in the Crucial Memory Advisor tool.)
The number of black components on a 200-pin SODIMM can vary, but it always has 100 pins on the front and 100 pins on the back, for a total of 200. 200-pin SODIMMs are approximately 2.625 inches long and 1.25 inches high, though the heights can vary. Like 144-pin SODIMMs, 200-pin SODIMMs have one small notch within the row of pins; however, the notch on the 200-pin SODIMMs is closer to the left side of the module.
200-pin SODIMMs are used to provide DDR and DDR2 SDRAM memory for notebook computers. 200-pin SODIMMs are available in PC2700 DDR SDRAM, PC3200 DDR SDRAM, DDR2 PC2-6400 SDRAM, DDR2 PC2-5300 SDRAM, DDR2 PC2-4200 SDRAM and DDR2 PC2-3200 SDRAM. To use DDR or DDR2 memory, your system motherboard must have 200-pin SODIMM slots and a DDR- or DDR2-enabled chipset. A DDR or DDR2 SODIMM will not fit into a standard SDRAM SODIMM socket. (Information about which memory technology your system uses is included in the Crucial Memory Advisor tool.)
The number of black components on a 200-pin SODIMM can vary, but it always has 100 pins on the front and 100 pins on the back, for a total of 200. 200-pin SODIMMs are approximately 2.625 inches long and 1.25 inches high, though the heights can vary. Like 144-pin SODIMMs, 200-pin SODIMMs have one small notch within the row of pins; however, the notch on the 200-pin SODIMMs is closer to the left side of the module.
- Allow convenient and fast access to the stored information your computer is actively using for maximum efficiency
- 800 MHz of memory speed makes your computer perform like an athlete
- 4 GB memory smoothly executes complex apps and games
- DDR2-800/PC2-6400 operates at up to 400 MHz data bus speed with minimal power consumption and as a result, you get optimal computer performance with an improved memory heat dissipation
- 2 x 2GB modules for dependable storage efficiency and maximum convenience
- 200-pin for enhanced, dependable system performance with maximum usability
- SoDIMM form factor with 200-pin and 4 GB memory size for enhanced performance and speed to allow maximum usability
- Unbuffered signal processing allows higher accuracy and enhanced ram module performance
-
Brand NameCrucial
-
Error CheckingNon-ECC
-
Form FactorSoDIMM
-
Limited WarrantyLifetime
-
Manufacturer Part NumberCT2KIT25664AC800
-
Memory Size4 GB
-
Memory Speed800 MHz
-
Memory StandardDDR2-800/PC2-6400
-
Memory TechnologyDDR2 SDRAM
-
Number of Modules2 x 2GB
-
Number of Pins200-pin
-
Product Name4GB (2 x 2 GB) DDR2 SDRAM Memory Module
-
Product TypeRAM Module
-
Signal ProcessingUnbuffered