Pinch to zoom

Brainboxes - Ethernet to 4 Relays and 8 Digital Inputs + RS485 Gateway

Product Number: SYNX3657925
  • 4 Form A Relays, 8 Digital Inputs and an RS485 Gateway Port
  • Easy-wire: Colour coded and numbered removable terminal blocks
  • Factory floor process control and automation, Integrated DIN rail mount
  • Supports simple ASCII or industry standard Modbus TCP
More details
Sold Out

This product is sold out and we do not know when we will be getting another shipment. We apologize for any inconvenience this may cause.

Check similar items above to see if a replacement product is available.

Product Description

Brainboxes - Ethernet to 4 Relays and 8 Digital Inputs + RS485 Gateway - Ethernet to DIO device: 8 non-isolated digital input channels and 4 digital Type A Relay Outputs. Powerful ARM 80 MHz, 32 Bit CPU. Offers robust and intelligent 'control side' devices that provide the interface to systems on the 24V factory floor environment, commonly referred to as 'process side'.
The device can be controlled over TCP/IP using the Modbus TCP protocol or simple ASCII commands. It behaves as a web relay controlled over ethernet. Additionally Brainboxes supply a suite of APIs and sample code to communicate with the device using Microsoft .NET framework Visual Basic, C#, C++, Java, Javascript, PHP and more. The device and be configured and secured from a web browser. The device can be installed as a COM Port on a Windows PC to give complete backwards compatibility essential for legacy applications.
The ED product range is designed for harsh environments. The digital output port line are implemented as protected output circuits, providing current overload and short circuit protection, voltage surge, overload and open circuit protection and over temperature protection to allow the widest possible usage and range of devices.
The outputs are good for driving hot and cold resistive loads, capacitive loads and inductive loads and are especially suited for loads with high inrush currents such as cold bulbs/lamps and motors. Typical applications are control and switching of AC and DC motors, Fans, relay drivers, pumps, Voltage Regulators and Battery Chargers, LEDs and Bulbs, Air Conditioning, Heaters and Solenoids.
Relay specification: 5A @ 30 VDC, 5A @ 250VAC, 5 A @ 110VAC
More from the Manufacturer

  • 4 Form A Relays, 8 Digital Inputs and an RS485 Gateway Port
  • Easy-wire: Colour coded and numbered removable terminal blocks
  • Factory floor process control and automation, Integrated DIN rail mount
  • Supports simple ASCII or industry standard Modbus TCP
  • -30°C to +80°C Temperature range
  • Software APIs for Visual Basic, C# and more
Guides & Information
Related Articles
 Need more information? Ask a Question
Read More

Product Specifications

  • Additional Information
    IO Channels IO Protocols: Modbus TCP or DCON ASCII (over TCP or Virtual COM port) Description: 8 Digital Inputs and 4 Relays Digital Inputs: 8 Digital Outputs: 4 Relays Analog Inputs: 0 Analog Outputs: 0 Watchdog: When device comms is lost, outputs can be set to predetermined state Power On Values: Outputs can be set to predetermined values on power on Safe Values: When Input triggered, outputs can be automatically set to predetermined value Digital IO Input Logic Level 0: -30.0V to +1.0V Input Logic Level 1: +2.0V to +30V Input Latches: Triggered by user programmable positive or negative edges, stays true until acknowledged Input Counter: User progammable- counts positive or negative transitions up to 200Hz Digital Output Type: Form A Relay (SPST: Single Pole Single Throw) - Normally Open Maximum Output Load Voltage: 60 VDC Maximum Output Current Sink: 5.0A per channel Serial Port Serial Gateway: RS485 NuDam/ADAM compatible expansion port Network Number of Ports: 1 Network Port Type:RJ45 Jack 10/100 MHz Autosensing, Cross Over Autosensing (MDIX) Network Protocols: ICMP, IP, TCP, DHCP, HTTP Protection: 1500V Magnetic Isolation between ports and network Power Power Input: 5V - 30V DC Redundant DC Dual Power Inputs, reverse polarity protected Power Supply 1 Description: Global Power Supply - PW-600 Power Supply 2 Description: Power supply PW-650 Max Input: 35 Volts General Operating Temperature Range: 0 °C to +80 °C / 32 °F to +176 °F Industrial Standard: Yes Storage Temperature: -40 °C to +85 °C / -40 °F to +185 °F Galvanic Isolation: No Power Consumption: Input +5V to +30V DC 100mA@24V 2.5W max Operating System Compatibility Microsoft Windows 10 Suitable for any device with a Web Browser Microsoft Windows 8 32 bit & 64 bit Editions Windows Server 2012 Android Windows Server 2008 R2 Microsoft Windows 7 32 bit & 64 bit Editions iOS Windows Server 2008 32 bit & 64 bit Editions Windows Vista 32 bit & 64 bit Editions Mac OS X Windows XP 32 bit & 64 bit Editions Microsoft Windows 2000 Linux Certifications EMC: CE
  • Brand Name
    Brainboxes
  • Compatibility
    CNC Machines/PLCs Gauges/Dials Counters Temperature Sensors Light Motor Fan Conveyor Belt
  • Country of Origin
    United Kingdom
  • Depth
    4"
  • Environmentally Friendly
    Yes
  • Height
    0.9"
  • Limited Warranty
    Lifetime
  • Manufacturer Part Number
    ED-538
  • Package Contents
    Ethernet to 4 Relays and 8 Digital Inputs + RS485 Gateway Installation CD Including Manual, Microsoft Signed Drivers & Utilities Quick Start Guide
  • Product Model
    ED-538
  • Product Name
    Ethernet to 4 Relays and 8 Digital Inputs + RS485 Gateway
  • Product Type
    Ethernet To Digital IO Module
  • Width
    5"

Reviews

Question and Answer

Mystery Coupon Offer
Save big on your first order!