SIIG 1x2 4K60Hz HDMI Splitter Over Cat6 Extender with Loopout/IR/ARC & RS-232 - Up to 230ft (70m) - Near Zero Latency
- 4K HDMI Extension - Easily extends UHD 4K@60Hz HDMI signals up to 230ft (70m) over economical Cat6/7 cabling to up to 2 displays
- Advanced Transmission Technology - Unique ultra-high-definition video digital transmission and connection extender technology, can extend and transmit 4K@60Hz YUV 4:4:4 video and audio, with zero latency, HDR
- HDMI Loopout + Extend 2 Displays - Supports one HDMI loop-out for additional local display connections and extender 2 receivers for HDTV or Projector via Cat6/7 cable
- EDID Management - Support EDID management capability to controls the resolution output to the display(s)
This product is sold out and we do not know when we will be getting another shipment. We apologize for any inconvenience this may cause.
Check similar items above to see if a replacement product is available.
Product Description
SIIG 1x2 4K60Hz HDMI Splitter Over Cat6 Extender with Loopout/IR/ARC & RS-232 - Up to 230ft (70m) - Near Zero Latency - Multiple Connectivity Ports
Comes with one HDMI video input port, one HDMI video loop-out port, two HDMI video output ports, four RJ45 network ports, three 3.5mm IR emitter ports, three 3.5mm IR receiver ports, two S/PDIF ports, one RS-232 terminal block, one DIP switch, three reset buttons, two audio slide switches, one DC power jack (12V/2A) for TX, two DC power jacks (5V/2A) for RXs
Applications
Meeting room
Lecture hall
Educational facilities
Multimedia education
Home theater
Restaurant
Shopping center
Library
Show room
- 4K HDMI Extension - Easily extends UHD 4K@60Hz HDMI signals up to 230ft (70m) over economical Cat6/7 cabling to up to 2 displays
- Advanced Transmission Technology - Unique ultra-high-definition video digital transmission and connection extender technology, can extend and transmit 4K@60Hz YUV 4:4:4 video and audio, with zero latency, HDR
- HDMI Loopout + Extend 2 Displays - Supports one HDMI loop-out for additional local display connections and extender 2 receivers for HDTV or Projector via Cat6/7 cable
- EDID Management - Support EDID management capability to controls the resolution output to the display(s)
- Audio Extraction - Extracts digital audio from the HDMI signal and routes it through the receiver's digital S/PDIF port via PCM2, Dolby 5.1, DTS 5.1 audio signal
- IR Control - Built-in bi-directional IR provides full remote control capabilities, control the HDMI source device at the remote display location and vice versa
- ARC and Audio Extraction - Through the Toslink connection of the Receiver (RX)
- RS-232 Control - Support RS-232 command control in the Transmitter
- Protection - Lightning Protection, Surge Protection, ESD Protection
- High Quality Wall mount Design - High quality metal housing improve heat dissipation and ensure system stability during long hours of operation
- Video Extender Transmitter/Receiver is all you need for dependable and productive audio/video transmission
- 3840 x 2160 maximum video resolution for a spectacular, sharp display with added reliability
- HDMI in allows convenient transfer of content and data to video extender transmitter/receiver to ensure maximum dependability
- Twisted pair media type helps minimize electromagnetic radiation and it also effectively resist external interference
- 1 input devices supported for maximum productive usability
- 2 output devices supported for maximum productive usability
- 229.66 ft maximum operating distance to allow efficient coverage and maximum usability
- 4K graphics mode for stunning, lively video quality
Product Specifications
-
Brand NameSIIG
-
Connectivity TechnologyWired
-
Country of OriginChina
-
Environmentally FriendlyYes
-
Frequency50 Hz 60 Hz
-
Graphics Modes4K
-
HDMI InYes
-
HDMI OutYes
-
Limited Warranty2 Year
-
Manufacturer Part NumberCE-H27911-S1
-
Maximum Operating Distance229.66 ft
-
Maximum Video Resolution3840 x 2160
-
Media Type SupportedTwisted Pair
-
Network (RJ-45)Yes
-
Number of HDMI Inputs1
-
Number of HDMI Outputs3
-
Number of Input Devices Supported1
-
Number of Network (RJ-45) Ports4
-
Number of Output Devices Supported2
-
Package Contents1 x Transmitter 2 x Receiver 3 x Power Adapter 1 x IR Blaster extension cable 2 x IR Receiver extension cable Terminal block Mounting kit User Manual
-
Product ColorBlack
-
Product Name1x2 HDMI Splitter Over Cat6 Extender with Loopout, IR, ARC & RS-232
-
Product TypeVideo Extender Transmitter/Receiver
-
Receiver Depth4.04"
-
Receiver Height0.79"
-
Receiver Weight (Approximate)8.64 oz
-
Receiver Width4.15"
-
Transmitter Depth4.09"
-
Transmitter Height0.91"
-
Transmitter Weight (Approximate)1.43 lb
-
Transmitter Width10.43"
-
Twisted Pair Cable StandardCategory 7