Pinch to zoom

Tripp Lite by Eaton DisplayPort over Cat6 Extender Kit Transmitter and Receiver with Repeater 4K 4:4:4 PoC 230 ft. (70.1 m) TAA

3 x Network (RJ-45)HDMI - 230 ft Extended Range - Metal - Black
Product Number: SYNX6317993
  • Supports UHD resolutions up to 4K @ 30 Hz (4:4:4) for crystal-clear video
  • Power over Cable (PoC) technology provides power to either unit via Cat6 cable
  • Can be daisy-chained up to 4 times (920 ft. total) via additional B127A-110-BD receivers
  • Plug-and-play operation with no software required for easy, immediate installation
More details
Sold Out

This product is sold out and we do not know when we will be getting another shipment. We apologize for any inconvenience this may cause.

Check similar items above to see if a replacement product is available.

Product Description

Tripp Lite by Eaton DisplayPort over Cat6 Extender Kit Transmitter and Receiver with Repeater 4K 4:4:4 PoC 230 ft. (70.1 m) TAA - DisplayPort 1.2a Extender Kit Ideal for Digital Signage in Schools and Offices
This complete transmitter and transceiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. The B127A-111-BDTD extends 4K signals from a DisplayPort source device to a DisplayPort monitor up to 230 feet (70.1 meters) away with zero latency via user-supplied Cat6 cabling.
Transmits Crystal-Clear 4K Video with 4:4:4 Color
The B127A-111-BDTD supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 30 Hz with 7.1-channel surround sound via the transceiver's TOSLINK audio output. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization allows you to fine-tune the image quality at the remote display.
Local HDMI Port on Transmitter Supports 4K @ 30 Hz Resolution
To monitor the video signal being extended to the transceiver, connect a 4K display to the transmitter's local HDMI port with a user-supplied HDMI cable.
Built-In PoC Technology Provides Transceiver Power to Avoid Bulky External Power Bricks
Power over Cable (PoC) technology powers either the transmitter or transceiver over Cat6 cable. Connect the included power supply at either end to power the entire installation. LEDs on both the transmitter and transceiver will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the transceiver where needed without worrying about finding a nearby AC outlet.
Create a Daisy Chain to Achieve Even More Distance
This extender kit is capable of forming daisy-chain installations up to 920 feet (280.4 meters) from the transmitter by connecting additional B127A-110-BD transceivers (sold separately). Up to four total transceivers can be chained together, each capable of extending a 4K/30 Hz signal up to 230 feet per unit. The kit is also compatible with Tripp Lite's B127A-010-H signal booster (sold separately), which allows the signal, when used in a daisy chain, to be enhanced up to 1,090 feet (332.2 meters) total. Note: B127A-010-H will only work when used in the first link of the daisy-chain installation.
Plug-and-Play Operation for Quick Setup and Immediate Use
The included transmitter and transceiver units work right out of the box with no software required. Mounting hardware is included for installing the transceiver on a wall, pole or 19-inch rack. Connect the transmitter to the source with a user-supplied DisplayPort cable (such as Tripp Lite's P580-Series). Then, connect the transceiver to the display with another user-supplied DisplayPort cable. Finally, connect the two units with user-supplied Cat6 patch cable (such as Tripp Lite N202-Series cable).
TAA-Compliant for GSA Schedule Purchases
The B127A-111-BDTD is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

  • Supports UHD resolutions up to 4K @ 30 Hz (4:4:4) for crystal-clear video
  • Power over Cable (PoC) technology provides power to either unit via Cat6 cable
  • Can be daisy-chained up to 4 times (920 ft. total) via additional B127A-110-BD receivers
  • Plug-and-play operation with no software required for easy, immediate installation
  • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
  • 1-year limited warranty
Tripp Lite by Eaton logo
Guides & Information
Related Articles
 Need more information? Ask a Question

Product Specifications

  • Brand Name
    Tripp Lite by Eaton
  • Country of Origin
    Taiwan
  • Environmentally Friendly
    Yes
  • HDMI
    Yes
  • Input Voltage
    230 V AC
  • Limited Warranty
    1 Year
  • Manufacturer Part Number
    B127A-111-BDTD
  • Network (RJ-45)
    Yes
  • Number of Network (RJ-45) Ports
    3
  • Package Contents
    Transmitter Transceiver External power Supply (Input: 100-240V, 50/60 Hz, 0.6A; Output: 24V 1A) 4 x International Plug Adapters (North America, Europe, U.K. and Australia) Mounting Hardware Owner's Manual
  • Product Color
    Black
  • Product Material
    Metal
  • Product Model
    B127A-111-BDTD
  • Product Name
    B127A-111-BDTD Audio/Video Extender
  • Product Type
    Audio/Video Extender
  • Receiver Weight (Approximate)
    15.87 oz
  • Transmitter Weight (Approximate)
    15.87 oz

Reviews

Question and Answer

Mystery Coupon Offer
Save big on your first order!