Pinch to zoom

Tripp Lite by Eaton 1-Port HDMI over Cat6 Receiver - 4K 60 Hz HDR 4:4:4 PoC HDCP 2.2 230 ft. (70.1 m) TAA

1 Output Device - 230 ft Range - 1 x Network (RJ-45) - 1 x HDMI Out - 4K UHD - 3840 x 2160 - Twisted Pair - Category 6 - Rack-mountable - TAA Compliant
Product Number: SYNX6298034
  • Supports 4K @ 60 Hz video resolutions (4:4:4) as specified in HDMI 2.0
  • Carries High Dynamic Range (HDR) signals for rich contrast and expanded color accuracy
  • Combines with optional B127A-010-H repeater to extend signal to 400 ft.
  • Power over Cable (PoC) technology provides power to the receiver via Cat6 cable
More details
Sold Out

This product is sold out and we do not know when we will be getting another shipment. We apologize for any inconvenience this may cause.

Check similar items above to see if a replacement product is available.

Product Description

Tripp Lite by Eaton 1-Port HDMI over Cat6 Receiver - 4K 60 Hz HDR 4:4:4 PoC HDCP 2.2 230 ft. (70.1 m) TAA - Features | HDMI Extender Receiver Ideal for Digital Signage in Schools and Workplaces
This 4K receiver is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow.
Extends a 4K A/V Transmission up to 230 ft....or Even Farther
The B127A-1A0-BH connects to a Tripp Lite B127A-Series transmitter, switch or splitter to extend 4K signals from an HDMI source to an HDMI display up to 230 feet (70.1 meters) away via user-supplied Cat6 cabling. By adding a Tripp Lite B127A-010-H signal repeater (sold separately) to the application, you can extend the signal up to 400 feet (121.9 meters).
Supports Crystal-Clear 4K Video with Multi-Channel Audio, HDR and 4:4:4 Color
The B127A-1A0-BH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz with 7.1-channel surround sound audio via TOSLINK. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This receiver also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization allows you to fine-tune the image quality at the remote display.
Built-In PoC Technology Provides Receiver Power to Avoid Bulky External Power Bricks
Power over Cable (PoC) technology powers the B127A-1A0-BH over Cat6 cable. LEDs indicate when the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the receiver where needed without worrying about finding a nearby AC outlet.
Plug-and-Play Operation for Quick Setup and Immediate Use
The receiver works right out of the package with no software required. Mounting hardware is included for installing it on a wall, pole or 19-inch rack. Connect the receiver to a transmitter, switch or splitter with user-supplied Cat6 cable (such as Tripp Lite's N202-Series). Connect to a 4K display with a user-supplied HDMI cable (such as Tripp Lite's P568- or P569-Series).
TAA-Compliant for GSA Schedule Purchases
The B127A-1A0-BH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
Typical Applications
Extend video signals from one room to another using Cat6 cable, which can pass through conduit to meet building codes
Gain flexibility in where the receiver is placed, with the freedom to move and relocate it away from an AC outlet
Improve the line of sight for digital signage in a hotel, restaurant, theater, house of worship, trade show or other location
System Requirements
Source device with HDMI output (Blu-ray player, cable box, laptop)
Display device with HDMI input (HDTV, projector, monitor)
Tripp Lite B127A-Series transmitter, switch or splitter

  • Supports 4K @ 60 Hz video resolutions (4:4:4) as specified in HDMI 2.0
  • Carries High Dynamic Range (HDR) signals for rich contrast and expanded color accuracy
  • Combines with optional B127A-010-H repeater to extend signal to 400 ft.
  • Power over Cable (PoC) technology provides power to the receiver via Cat6 cable
  • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
  • 1-year limited warranty
Tripp Lite by Eaton logo
Guides & Information
Related Articles
 Need more information? Ask a Question

Product Specifications

  • Brand Name
    Tripp Lite by Eaton
  • Connectivity Technology
    Wired
  • Country of Origin
    Taiwan
  • Environmentally Friendly
    Yes
  • Form Factor
    Rack-mountable
  • Frequency
    50 Hz 60 Hz
  • Graphics Modes
    4K UHD
  • HDMI Out
    Yes
  • Limited Warranty
    1 Year
  • Manufacturer Part Number
    B127A-1A0-BH
  • Maximum Operating Distance
    230 ft
  • Maximum Video Resolution
    3840 x 2160
  • Media Type Supported
    Twisted Pair
  • Network (RJ-45)
    Yes
  • Number of HDMI Outputs
    1
  • Number of Network (RJ-45) Ports
    1
  • Number of Output Devices Supported
    1
  • Package Contents
    B127A-1A0-BH 1-Port HDMI over Cat6 Receiver Mounting Hardware Owner's Manual
  • Product Color
    Black
  • Product Model
    B127A-1A0-BH
  • Product Name
    B127A-1A0-BH 1-Port HDMI over Cat6 Receiver
  • Product Type
    Video Extender Receiver
  • Receiver Depth
    2.46"
  • Receiver Height
    1.06"
  • Receiver Weight (Approximate)
    1 lb
  • Receiver Width
    4.53"
  • Twisted Pair Cable Standard
    Category 6

Reviews

Question and Answer

Mystery Coupon Offer
Save big on your first order!