Tripp Lite HDMI over Dual Cat5 / Cat6 Extender Wall Plate KitFace Plates
Wall Mount - View Complete Details
Product Number: SYNX2200676
In Stock - Hurry, only 77 left.
Estimated Delivery - 5 business day(s) - Fri 11/4 6 business days - Mon 11/7
Free Shipping - This item qualifies for Free Shipping
You May Also Like
Due to its limited shelf life or other concerns, we do not accept returns on this product unless it is damaged, defective or incorrect due to an error on our part.
Click for Tour
Click the link above for a guided, interactive tour of this product.
Tripp Lite HDMI over Dual Cat5 / Cat6 Extender Wall Plate Kit - With Tripp Lites HDMI Over Cat5/Cat6 Wallplate Extender Kit, you can locate a HDMI enabled display up to 230 ft. away from the HDMI source, using readily available Cat5 or Cat6 UTP cable (for best performance, use Solid wire Cat6). The kit consists of a Passive wallplate at the source side, and an Active wallplate (with built-in signal regenerator) at the display side. Simply run two Cat5/6 UTP cables between the two wallplates, and plug in standard Tripp Lite HDMI patch cables to the HDMI source and the display. The Green LED on the Display wallplate lets you know that power and a signal are coming from a connected source. The Red LED indicates only a signal is being received. The kit is functioning properly when the unit is connected to a display and the Green LED is lit.View Product Specs
Still have a question? Click to ask a Question
REVIEW SNAPSHOT®by PowerReviews
Reviewed by 1 customer
Displaying review 1
Comments about Tripp Lite HDMI over Dual Cat5 / Cat6 Extender Wall Plate Kit:
I had already bought one these for an application for a new house addition and it worked great (about a 25' run). However, the 2nd unit that I bought was to feed the output signal from an Onkyo AV receiver, through a powered HDMI splitter, into this extender to the remote TV. It does not work properly this way. If I just go from the Direct TV receiver's output, through the splitter, into this extender, and into the remote TV - it works great (same as the 1st application). Now I'm told that I need a signal booster if I want to use my Onkyo AV receiver to resolve the poor signal quality at the remote TV. Do your research before you buy.
"Write your Opinion"
Help others make the right choice.
Tell them what you think.
Question & Answer
No questions have been posted for this product.
Have a question about this product? Please click the button below to get started. Once you have posted your question we will submit it to our community of customers and with our own staff who have recent experience with the same product for their open and honest feedback.Ask a Question
Add the finishing touch to audio/video installations with a decorative feed-through wall plate. This wall plate is stamped from sturdy 20 gauge stainless steel, and is designed to mount in standard electrical boxes or mud rings. The thick stainless steel ...
Cables To Go's flush mount Keystone Wallplates will fulfill the most complicated station installation requirements through a wide selection of snap-in modules. A variety of jacks and connectors will fill the wall plate openings to meet your specific requirements of ...
With a wide selection of snap-in modules, our flush-mount keystone wall plates will fulfill the most complicated station installation requirements. A variety of jacks and connectors will fill the wall plate openings. Since the inserts are a snap to install ...