Tripp Lite by Eaton DVI over Cat5/6 Active Extender Kit Box-Style Transmitter/Receiver for Video Up to 200 ft. (60 m) TAA
- Extender kit comes with transmitter and receiver units
- Supports DVI-D Single-Link video resolutions up to 1920 x 1080 @ 60Hz
- Extends a 1920 x 1080 @ 60Hz signal up to 150 ft., or a 1024 x 768 @ 60Hz signal up to 200 ft.
- Use 24AWG, Solid Wire Cat5e/6 cable, such as Tripp Lite's N202-Series, to achieve maximum distance and resolution
Product Description
Tripp Lite by Eaton DVI over Cat5/6 Active Extender Kit Box-Style Transmitter/Receiver for Video Up to 200 ft. (60 m) TAA - The B140-101X is a DVI Over Cat5 Active Extender Kit that comes with both transmitter and receiver units. It transmits a DVI-D Single-Link signal up to 200 ft. away using a single Cat5e/6 patch cable. To achieve maximum distance and resolution, use 24AWG Solid Wire Cat5e/6 cable (Tripp Lite's N202-Series). The B140-101X is compatible with all operating systems, and is plug and play, with no software or drivers required. It features a built-in Equalization control for adjustment of the video image. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
Installation is simple. Connect a the built-in DVI connector on the transmitter unit to a DVI source. Connect the receiver unit to a display using a Tripp Lite P561-Series DVI cable (not included). Finally, the RJ45 ports on the transmitter and receiver units are connected using a single Cat5e/6 cable. A 1920 x 1080 @ 60Hz signal can be extended up to 150 ft. from the source,, or a 1024 x 768 @ 60Hz signal up to 200 ft..
Further expand the range and number of monitors by using a B140-110 repeater unit. Add up to four remote units (three repeaters and one active receiver) in a single chain, for a total of 4 displays. (An active receiver should be the last unit in a chain) A 1920 x 1080 @ 60Hz signal can be extended up to 125 ft. from each repeater to the next unit in the chain, or a 1024 x 768 @ 60Hz signal can be extended up to 175 ft..
- Extender kit comes with transmitter and receiver units
- Supports DVI-D Single-Link video resolutions up to 1920 x 1080 @ 60Hz
- Extends a 1920 x 1080 @ 60Hz signal up to 150 ft., or a 1024 x 768 @ 60Hz signal up to 200 ft.
- Use 24AWG, Solid Wire Cat5e/6 cable, such as Tripp Lite's N202-Series, to achieve maximum distance and resolution
- Can further expand the range and number of monitors by adding B140-110 repeaters
- Compatible with all operating systems
- Plug and play, no software or drivers required
- Features a built-in Equalization control for adjustment of the video image
- Video Extender Transmitter/Receiver is a reliable audio/video transmission extending solution
- 1920 x 1080 maximum video resolution for a spectacular, sharp display with added reliability
- DVI in for your convenience and optimal audio/video output with maximum usage feasibility
- DVI out for your convenience and optimal audio/video output with maximum usage feasibility
- Twisted pair media type is very easy to connect and can carry both analog and digital data at the same time for maximum connection efficiency
- The B140-101X video extender transmitter/receiver provides plenty of freedom with wired connectivity
- 1 input devices supported to better accommodate your specific requirements
- 1 output devices supported to better accommodate your specific requirements
- 200 ft maximum operating distance for reliable coverage and maximum portability
- Full HD graphics mode for stunning, lively video quality
Product Specifications
-
Brand NameTripp Lite by Eaton
-
Certifications & StandardsTAA
-
Connectivity TechnologyWired
-
Country of OriginTaiwan
-
DVI InYes
-
DVI OutYes
-
Environmentally FriendlyYes
-
Form FactorWall Mountable
-
Graphics ModesFull HD
-
Limited Warranty1 Year
-
Manufacturer Part NumberB140-101X
-
Maximum Operating Distance200 ft
-
Maximum Video Resolution1920 x 1080
-
Media Type SupportedTwisted Pair
-
Network (RJ-45)Yes
-
Number of DVI Inputs1
-
Number of DVI Outputs1
-
Number of Input Devices Supported1
-
Number of Network (RJ-45) Ports2
-
Number of Output Devices Supported1
-
Package ContentsB140-101X Local Transmitter Unit B140-101X Remote Receiver Unit Screwdriver (used for Equalization control) Mounting Hardware for Receiver Unit External Power Supply (Input: 100-240V, 50/60Hz, 0.5A Output: 5V, 2A) Owner's Manual
-
Product ColorBlack
-
Product ModelB140-101X
-
Product NameDVI over Cat5 Active Extender Kit
-
Product TypeVideo Extender Transmitter/Receiver
-
Twisted Pair Cable StandardCategory 6