Tripp Lite by Eaton DVI over Cat5/6 Passive Extender Remote Receiver for Video DVI-D Single Link Up to 100 ft. (30 m) TAA
- For use with B140-002 or B140-004 extender/splitter transmitter units
- Supports DVI-D Single-Link video resolutions up to 1920 x 1080 @ 60Hz
- Extends a 1920 x 1080 @ 60Hz signal up to 50 ft., or a 1024 x 768 @ 60Hz signal up to 100 ft.
- Use 24AWG, Solid Wire Cat5e/6 cable, such as Tripp Lite's N202-Series, to achieve maximum distance and resolution
This product is sold out and we do not know when we will be getting another shipment. We apologize for any inconvenience this may cause.
Check similar items above to see if a replacement product is available.
Product Description
Tripp Lite by Eaton DVI over Cat5/6 Passive Extender Remote Receiver for Video DVI-D Single Link Up to 100 ft. (30 m) TAA - The B140-1P0 is a receiver unit that is used with the B140-002 and B140-004 extender/splitter transmitter units, and it transmits a DVI-D Single-Link signal up to 100 ft. away using a single Cat5e/6 patch cable. To achieve maximum distance and resolution, use 24AWG Solid Wire Cat5e/6 cable (Tripp Lite's N202-Series). The B140-1P0 is compatible with all operating systems, and is plug and play, with no external power, software or drivers required. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
Installation is simple. Connect a B140-002 or B140-004 transmitter (not included) to a DVI source using a Tripp Lite P561-Series DVI cable (not included). Connect the B140-1P0's built-in DVI connector to a display. Finally, the receiver unit is connected to an RJ45 port on the transmitter unit using a single Cat5e/6 cable. A 1920 x 1080 @ 60Hz signal can be extended up to 50 ft. from the source,, or a 1024 x 768 @ 60Hz signal up to 100 ft..
- For use with B140-002 or B140-004 extender/splitter transmitter units
- Supports DVI-D Single-Link video resolutions up to 1920 x 1080 @ 60Hz
- Extends a 1920 x 1080 @ 60Hz signal up to 50 ft., or a 1024 x 768 @ 60Hz signal up to 100 ft.
- Use 24AWG, Solid Wire Cat5e/6 cable, such as Tripp Lite's N202-Series, to achieve maximum distance and resolution
- Compatible with all operating systems
- Plug and play, no external power, software or drivers required
- Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
- Video Extender Receiver is a reliable audio/video transmission extending solution
- 1920 x 1080 maximum video resolution for a vivid, crystal clear display with added productivity
- DVI out for your convenience and optimal audio/video output with maximum usage feasibility
- The B140-1P0 video extender receiver provides plenty of freedom with wired connectivity
- 1 input devices supported for maximum productive usability
- 1 output devices supported to better accommodate your specific requirements
- 100 ft maximum operating distance for feasible operation and optimal coverage
- Full HD graphics mode for stunning, lively video quality
Product Specifications
-
Brand NameTripp Lite by Eaton
-
Certifications & StandardsTAA
-
Connectivity TechnologyWired
-
Country of OriginTaiwan
-
DVI OutYes
-
Environmentally FriendlyYes
-
Graphics ModesFull HD
-
Limited Warranty1 Year
-
Manufacturer Part NumberB140-1P0
-
Maximum Operating Distance100 ft
-
Maximum Video Resolution1920 x 1080
-
Media Type SupportedTwisted Pair
-
Network (RJ-45)Yes
-
Number of DVI Outputs1
-
Number of Input Devices Supported1
-
Number of Network (RJ-45) Ports1
-
Number of Output Devices Supported1
-
Package ContentsB140-1P0 DVI Over Cat5 Passive Extender Remote Unit Owner's Manual
-
Product ModelB140-1P0
-
Product NameDVI Over Cat5 Passive Extender Remote Unit
-
Product TypeVideo Extender Receiver
-
Twisted Pair Cable StandardCategory 6