Tripp Lite HDMI Over Cat5/Cat6 Passive Video Extender Remote Unit TAA / GSA

Click to Zoom in

Alternate ImageAlternate ImageAlternate ImageAlternate Image

Tripp Lite HDMI Over Cat5/Cat6 Passive Video Extender Remote Unit TAA / GSA

1 Input Device - 1 Output Device - 100 ft Range - 1 x Network (RJ-45) - 1 x HDMI Out - Twisted Pair - Category 6 - View Complete Details

Product Number: SYNX2813590

2 star rating21 reviewRead All ReviewsWrite a Review
Sold Out

This product is sold out and we do not know when we will be getting another shipment. We apologize for any inconvenience this may cause.

Check similar items below to see if a replacement product is available.

Accessories

You May Also Like

More like this

Product Details

Not
Returnable
Not Returnable

Due to its limited shelf life or other concerns, we do not accept returns on this product unless it is damaged, defective or incorrect due to an error on our part.

Product Tour
Click for Tour
Product Tour

Click the link above for a guided, interactive tour of this product.

Tripp Lite HDMI Over Cat5/Cat6 Passive Video Extender Remote Unit TAA / GSA - The B126-1P0 HDMI over Cat5/Cat6 Passive Remote Receiver works with Tripp Lite's B126-002 and B126-004 transmitters to extend an HDMI signal to multiple projectors, monitors or televisions in a chain. It's ideal for digital signs, trade shows, presentations, classrooms, churches, retail settings and other applications where the video source is located farther than conventional cables allow.

The B126-1P0 can extend a 1080i (60 Hz) signal up to 100 feet (30.5 m) or a 1080p (60 Hz) signal up to 50 feet (15.2 m) with a single Cat5e/6 cable (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series) between it and the transmitter. The built-in HDMI cable features a latching connector that helps prevent accidental disconnection. No external power is required.

In addition to crystal-clear video, the B126-1P0 delivers full, rich stereo and 7.1-channel surround sound (multi-channel or PCM) audio when paired with a B126-002 or B126-004 transmitter. Supports 24-bit True Color (8 bits per channel) and HDCP compatibility. Easy to set up with no software or drivers to install.

View More Product Details
Still have a question? Click to ask a Question

Reviews

REVIEW SNAPSHOT®

by PowerReviews
Tripp Lite HDMI Over Cat5/Cat6 Passive Video Extender Remote Unit TAA / GSA
 
2.0

(based on 1 review)

Ratings Distribution

  • 5 Stars

     

    (0)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (1)

  • 1 Stars

     

    (0)

Reviewed by 1 customer

Displaying review 1

Back to top

 
2.0

I couldn't get it to work

By 

from Okeechobee, FL

Verified Buyer

Comments about Tripp Lite HDMI Over Cat5/Cat6 Passive Video Extender Remote Unit TAA / GSA:

Not sure what the issue was but I connected it to the output of my Tripplite B126-004, HDMI to CAT5 splitter the signal going to my monitor was very grainy. I later connected a HDMI cable to the LOCAL output of my splitter and ran to same monitor and the signal was perfect. This part was suppose to be compatible with the B126-004 but it didn't work for me.

Displaying review 1

Back to top

"Write your Opinion"

Help others make the right choice.
Tell them what you think.

Write a Review

Question & Answer

No questions have been posted for this product.

Have a question about this product? Please click the button below to get started. Once you have posted your question we will submit it to our community of customers and with our own staff who have recent experience with the same product for their open and honest feedback.

Ask a Question