Pinch to zoom

Tripp Lite by Eaton 4 x 4 HDMI over Cat5/6 Matrix Splitter Switch Box-Style Transmitter for Video/Audio Up to 175 ft. (53 m) TAA

1920 x 1080 - Full HD - 1080i - Twisted Pair - 4 x 4 - Display, TV, Projector - TAA Compliant
Product Number: SYNX3768027
  • Routes any source to any display or same source to multiple displays
  • Supports high-definition video resolutions up to 1080p (60 Hz)
  • Switches inputs via button, remote control or RS-232 serial
  • Works with all operating systems and HDMI video sources
More details
Sold Out

This product is sold out and we do not know when we will be getting another shipment. We apologize for any inconvenience this may cause.

Check similar items above to see if a replacement product is available.

Product Description

Tripp Lite by Eaton 4 x 4 HDMI over Cat5/6 Matrix Splitter Switch Box-Style Transmitter for Video/Audio Up to 175 ft. (53 m) TAA - The B126-4X4 4-port HDMI over Cat5/Cat6 Matrix Splitter Switch works with Tripp Lite remote receivers to share one or more HDMI sources between multiple projectors, monitors or televisions. It's ideal for digital signs, trade shows, presentations, retail and other applications where the video sources are located farther than conventional cables allow or that require multiple displays connected to one source.

It uses HDMI cable (see Tripp Lite's P568-Series) to connect to the sources and Cat5e/6 cable to transmit to the remote monitors (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series). Any video source can be routed to any monitor, or you can send the same source to multiple monitors. Switch between inputs via pushbuttons, RS-232 serial or the included remote control.

When used with Tripp Lite's B126-1A0 or B126-1A0-WP-1 active remote receivers, the switch can extend a 1080i (60 Hz) signal up to 175 feet or a 1080p signal (60 Hz) up to 125 feet. With a B126-1P0 or B126-1P0-WP-1 passive remote receiver, it can extend a 1080i (60 Hz) signal up to 75 feet and a 1080p (60 Hz) signal up to 50 feet. Add up to three B126-110 remote repeaters to each channel to fully extend the signal range or add more displays.

In addition to crystal-clear video, the B126-4X4 delivers full, rich stereo. Easy to set up with no software or drivers to install. Mounts to a wall, rack or pole using the included hardware.
Features
Extends High-Definition Signals
Extends a 1080i (60 Hz) signal up to 175 ft. and a 1080p (60 Hz) signal up to 125 ft. with each optional B126-110 remote repeater
Extends a 1080i (60 Hz) signal up to 175 ft. and a 1080p (60 Hz) signal up to 125 ft. with B126-1A0 or B126-1A0-WP-1 active remote receiver
Extends a 1080i (60 Hz) signal up to 75 ft. and a 1080p (60 Hz) signal up to 50 ft. with B126-1P0 or B126-1P0-WP-1 passive remote receiver
Add up to 3 remote repeaters on each channel for maximum signal range
Connects to next link in the chain with one Cat5e/6 cable (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series)
Supports the Latest Video and Audio Resolutions
Works with all operating systems and HDMI video sources
Supports HD resolutions up to 1080p (60 Hz)
Supports stereo audio
Supports 24-bit True Color (8 bits per channel) and HDCP
Easy to Set Up and Use
Route any video display to any monitor, or route the same display to multiple monitors
Plug-and-play engineering-no software or drivers to download and install
Connects quickly to sources with HDMI cable, such as Tripp Lite's P568-Series
Included IR extension cable used to extend remote control range
LEDs indicate at a glance when the unit is receiving power and an HDMI signal from the source
Included mounting hardware lets you install the units on a wall, rack or pole
TAA-Compliant
Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

  • Routes any source to any display or same source to multiple displays
  • Supports high-definition video resolutions up to 1080p (60 Hz)
  • Switches inputs via button, remote control or RS-232 serial
  • Works with all operating systems and HDMI video sources
  • Plug and play-no software or drivers to install
  • Quickly switches both video and audio between sources without physical access
  • A great solution for connecting display
  • Up to 1920 x 1080 video resolution
Tripp Lite by Eaton logo
Guides & Information
Related Articles
 Need more information? Ask a Question

Product Specifications

  • Brand Name
    Tripp Lite by Eaton
  • Connectivity Technology
    Cable
  • Country of Origin
    Taiwan
  • Depth
    3.9"
  • Device Supported
    Display Projector TV
  • Environmentally Friendly
    Yes
  • Graphics Modes
    Full HD
  • HDMI In
    Yes
  • Height
    1.2"
  • Limited Warranty
    1 Year
  • Manufacturer Part Number
    B126-4X4
  • Maximum Operating Distance
    175 ft
  • Maximum Video Resolution
    1920 x 1080
  • Media Type Supported
    Twisted Pair
  • Number of Displays Supported
    4
  • Number of HDMI Inputs
    4
  • Number of Input Devices Supported
    4
  • Package Contents
    HDMI over Cat5 / Cat6 4X4 Matrix Switch External Power Supply (Input: 100-240V, 50/60Hz, 0.5A Output B126-2X2: 5V, 2A 3.5 mm to DB9 Adapter Cable ( serial ) Mounting Hardware Remote Control Owner's Manual IR Extension Cable
  • Product Color
    Black
  • Product Model
    B126-4X4
  • Product Name
    B126-4X4 4 x 4 HDMI over Cat5/Cat6 Matrix Splitter Switch
  • Product Type
    Audio/Video Switchbox
  • Scan Format
    1080i
  • Serial Port
    Yes
  • Width
    5.9"

Reviews

Question and Answer

Mystery Coupon Offer
Save big on your first order!