Pinch to zoom

Eaton 5P UPS 850VA 600W 230V Line-Interactive UPS, C14 Input, 4 C13 Outlets, True Sine Wave, Cybersecure Network Card Option, 1U

1U Rack-mountable - 4 Minute Stand-by - 220 V AC Input - 240 V AC Output - 4 x IEC 60320 C13
Product Number: SYNX3536243
  • Keeps equipment running during outages to allow time for file saves and safe shutdown
  • Provides 20% more wattage compared to traditional UPS systems to protect devices
  • Exclusive ABM technology with 3-stage charging increases internal battery life by 50%
  • 5-button graphical LCD offers critical UPS data and load status at a glance
More details
Sold Out

This product is sold out and we do not know when we will be getting another shipment. We apologize for any inconvenience this may cause.

Check similar items above to see if a replacement product is available.

Product Description

Eaton 5P UPS 850VA 600W 230V Line-Interactive UPS, C14 Input, 4 C13 Outlets, True Sine Wave, Cybersecure Network Card Option, 1U - 850VA/600W/230V Battery Backup for Network Closets and Small Data Centers This 5P rack-mount line-interactive UPS system provides reliable battery backup for small business, education, retail, financial or healthcare networking components, including servers, VoIP phones, data storage and PoE switches. The 5P850GR protects connected devices by providing 20 percent more wattage compared to traditional UPS systems. Reliable Battery Backup Keeps You Operational Through Power Outages Valve regulated lead acid (VRLA) battery modules allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. Exclusive ABM technology increases battery life by 50 percent and closely monitors battery health to provide advanced notice when batteries need replacing. Optional Gigabit Network Interface Offers 24/7 Remote Access The NETWORK-M2 Gigabit network card (sold separately) enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. UPS firmware can also be flashed remotely through the NETWORK-M2 without dropping the load, so you don't have to plan for downtime. The card meets both UL 2900-1 and IEC 62443-4-2 standards for cybersecurity, which were developed to address the vulnerability of connected devices to known malware/exploits and to protect business from these risks. An optional Environmental Monitoring Probe Gen 2 (EMPDT1H1C2, sold separately) provides a variety of environmental monitoring capabilities, including temperature and humidity conditions. C13 Outlets Protect Your Connected Components Four managed C13 outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Two outlets are grouped into two load banks that let you shed non-critical loads to extend runtime for critical loads. LCD Interface Keeps You Informed at a Glance The five-button graphical LCD provides useful information about the UPS itself, load status, events, measurements and settings. To save energy, the LCD switches to the screen saver after five minutes of inactivity. The backlight LCD automatically dims after 10 minutes of inactivity.

  • Keeps equipment running during outages to allow time for file saves and safe shutdown
  • Provides 20% more wattage compared to traditional UPS systems to protect devices
  • Exclusive ABM technology with 3-stage charging increases internal battery life by 50%
  • 5-button graphical LCD offers critical UPS data and load status at a glance
  • Optional NETWORK-M2 Gigabit network card enables full remote access and control
  • Experience higher efficiency with lower energy cost
  • Up to 4 minute runtime on full load to preserve critical data from power shortage interruptions
  • 600 W load capacity - backup power for your valuable electronics
  • 850 VA load capacity provides sufficient backup during power failures
  • Lead Acid battery chemistry to better suit your requirements with maximum productivity
  • IEC 60320 C14 plug/connector type for convenient usage with added dependability
  • IEC 60320 C13 receptacle type offers ease of operation with maximum efficiency
  • 220 V AC input voltage for optimal performance with maximum usability
  • 240 V AC output voltage for maximum dependability and added productivity
  • Rack-mountable form factor allows hassle-free and easy usage with increased efficiency
Eaton logo
Guides & Information
Related Articles
 Need more information? Ask a Question

Product Specifications

  • Battery Chemistry
    Lead Acid
  • Brand Name
    Eaton
  • Certifications & Standards
    UL 1778 UL497A cULus CE IEC 62040-2 C1-C2 EN 55024 CISPR22 Class B FCC part 15 Class B
  • Country of Origin
    China
  • Depth
    20"
  • Environmental Certification
    RoHS
  • Environmentally Friendly
    Yes
  • Form Factor
    Rack-mountable
  • Height
    1.7"
  • Hot Swappable
    Yes
  • Input Voltage
    220 V AC
  • Limited Warranty
    3 Year
  • Load Capacity (VA)
    850 VA
  • Load Capacity (Watt)
    600 W
  • Manufacturer Part Number
    5P850GR
  • Network (RJ-45)
    Yes
  • Output Voltage
    132 V AC 208 V AC 220 V AC 230 V AC 240 V AC
  • Package Contents
    5P Rackmount UPS User Manual CD Intelligent Power Software Suite CD Quick Start Guide USB Cable RS-232 Serial Cable 4-Post Rail Kit 2 x IEC-to-IEC Jumper Cables Output Cable Locking System Input Cable Locking System
  • Plug/Connector Type
    IEC 60320 C14
  • Product Model
    5P
  • Product Name
    5P Rackmount UPS
  • Product Type
    Line-interactive UPS
  • Rack Height
    1U
  • Receptacle Detail
    4 x IEC 60320 C13
  • Receptacle Type
    IEC 60320 C13
  • Software Included
    Intelligent Power Software Suite
  • USB
    Yes
  • Width
    17.2"

Reviews

Question and Answer

Mystery Coupon Offer
Save big on your first order!