Pinch to zoom

Eaton Tripp Lite Series SmartPro 1950VA 1950W 120V Line-Interactive Sine Wave UPS - 7 Outlets, Extended Run, Network Card Included, LCD, USB, DB9, 2U Rack/Tower Battery Backup

1950VA/1950W - 120 V AC - 4.50 Minute - 2U Rack-mountable - 4.50 Minute - 4 x NEMA 5-15R, 4 x NEMA 5-15/20R
Product Number: SYNX3461631
  • Provides complete battery backup and pure sine wave power output for servers, switches and other high-end distributed IT equipment
  • Protects equipment against blackouts, brownouts, transient surges and line noise
  • Keeps equipment running during outages to allow time for file saves and safe shutdown
  • Unity power factor ensures maximum power possible at each power rating
More details
Sold Out

This product is sold out and we do not know when we will be getting another shipment. We apologize for any inconvenience this may cause.

Check similar items above to see if a replacement product is available.

Product Description

Eaton Tripp Lite Series SmartPro 1950VA 1950W 120V Line-Interactive Sine Wave UPS - 7 Outlets, Extended Run, Network Card Included, LCD, USB, DB9, 2U Rack/Tower Battery Backup - 1.95kVA/1.95kW/120V Battery Backup for Distributed IT, Telecom or Enterprise Deployments
This rack-mount line-interactive UPS system provides reliable battery backup and AC power protection against blackouts, brownouts, surges and line noise that can damage your valuable IT equipment or destroy data. The SMART2200RM2UN is ideal power management for high-end in-rack networking equipment, including servers, VoIP phones, data storage and PoE switches. Unity power factor ensures the most watts possible at each power rating, so you can connect more equipment.
Reliable, Expandable Battery Backup Keeps You Operational Through Power Outages
The field-replaceable, hot-swappable VRLA battery modules allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. Switchover from line to battery power happens within milliseconds to maintain continuous operation of connected equipment without interruption or rebooting.
Pre-Installed LX Platform Network Management Card Allows Remote Access 24/7
The WEBCARDLXE network interface enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. The IP-based Auto Probe feature ensures continuous network uptime by communicating with other network devices, detecting lost connectivity and automatically rebooting IT equipment. Optional EnviroSense2 modules (E2MT, E2MTDO and E2MTHDI, all sold separately) provide a variety of environmental monitoring and control options.
NEMA 5-20R Outlets Protect Your Connected Components
One L5-20R and six managed 5-20R outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. Four outlets are grouped into two programmable load banks that let you shed non-critical loads to extend runtime for critical loads. Front and rear cooling fans help protect equipment from overheating.
Automatic Voltage Regulation (AVR) Corrects Low- and High-Voltage Conditions
AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. The SMART2200RM2UN maintains regulated 120V nominal output during brownouts and overvoltages from 80V to 151V while keeping the battery fully charged and ready to take over in case of power failure.
Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better
This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.
Intuitive Front-Panel Interface for Convenient UPS Operation and Monitoring
The two-line front-panel LCD monitoring screen features ten selectable screens that allow quick access to a wide range of detailed UPS and site power information. LEDs show UPS status: a green light means utility power is on, an orange light means the UPS is in battery mode and a red light indicates an active alarm or fault. The control panel rotates to accommodate both rack-mount and tower configurations.
More from the Manufacturer

  • Provides complete battery backup and pure sine wave power output for servers, switches and other high-end distributed IT equipment
  • Protects equipment against blackouts, brownouts, transient surges and line noise
  • Keeps equipment running during outages to allow time for file saves and safe shutdown
  • Unity power factor ensures maximum power possible at each power rating
  • Included WEBCARDLXE network interface allows 24/7 remote access and control
  • 2-line front-panel LCD with 10 selectable screens reports detailed UPS and site power info
  • 2-year warranty, 3 year with registration. Note: Registration is required for 3-year warranty.
  • $250,000 Ultimate Lifetime Insurance
  • Line-interactive UPS allows convenient, long-time usage with increased efficiency
  • Up to 4.50 minute runtime on full load to preserve critical data from power shortage interruptions
  • 1950 W load capacity - backup power for your valuable electronics
  • 1950 VA load capacity - work without any interruption during power outages
  • 4.50 Hour typical battery recharge time for better convenience and prolonged, productive usage
  • NEMA 5-20P plug/connector type for maximum usability with added reliability
  • NEMA 5-15R receptacle type offers ease of operation with maximum efficiency
  • 110 V AC input voltage for better reliance and maximum dependability
  • 120 V AC output voltage for optimal performance with maximum feasibility
  • Rack-mountable line-interactive ups allows easy and convenient usage without any hassle
Tripp Lite by Eaton logo
Guides & Information
Related Articles
 Need more information? Ask a Question
Read More

Product Specifications

  • Brand Name
    Tripp Lite by Eaton
  • Certifications & Standards
    UL1778 CSA NOM FCC Part 15 Category A (EMI)
  • Country of Origin
    China
  • Depth
    23.7"
  • Emergency Power OFF
    Yes
  • Form Factor
    Rack-mountable
  • Height
    3.5"
  • Hot Swappable
    Yes
  • Input Voltage
    110 V AC
  • Limited Warranty
    3 Year
  • Load Capacity (VA)
    1950 VA
  • Load Capacity (Watt)
    1950 W
  • Manufacturer Part Number
    SMART2200RM2UN
  • Network Management
    SNMP Manageable
  • Output Voltage
    120 V AC
  • Package Contents
    SmartPro SMART2200RM2UN 2.2kVA Rack-mountable UPS PowerAlert Software CD USB Cable Serial Cable EPO Cable 4 Post Rackmount Installation kit Instruction Manual Network Interface Card
  • Plug/Connector Type
    NEMA 5-20P
  • Product Line
    SmartPro
  • Product Model
    SMART2200RM2UN
  • Product Name
    SmartPro SMART2200RM2UN 2200VA Rack-mountable UPS
  • Product Type
    Line-interactive UPS
  • Rack Height
    2U
  • Receptacle Detail
    4 x NEMA 5-15/20R 4 x NEMA 5-15R
  • Receptacle Type
    NEMA 5-15/20R NEMA 5-15R
  • Serial Port
    Yes
  • Software Included
    PowerAlert Software
  • Transfer Time
    5 ms
  • Typical Battery Recharge Time
    4.50 Hour
  • USB
    Yes
  • Width
    17.5"

Reviews

Question and Answer

Mystery Coupon Offer
Save big on your first order!