Tripp Lite by Eaton UPS SmartPro 120V 1.05kVA 650W Line-Interactive Sine Wave UPS Tower Network Card Options USB DB9 8 Outlets
- Corrects under- and overvoltages from 83V to 145V
- 8 NEMA 5-15R outlets
- Front-panel LEDs indicate load, power, voltage and battery statuses
- Network power management and control capability
This product is sold out and we do not know when we will be getting another shipment. We apologize for any inconvenience this may cause.
Check similar items above to see if a replacement product is available.
Product Description
Tripp Lite by Eaton UPS SmartPro 120V 1.05kVA 650W Line-Interactive Sine Wave UPS Tower Network Card Options USB DB9 8 Outlets - Protects Mission-Critical Equipment
Provides fully regulated sine wave AC output for point-of-sale applications, VoIP systems and small business networks
Audible alarm signals loss of utility power, low battery or overload
8 NEMA 5-15R outlets
6 ft. power cord with 120V NEMA 5-15P input
690-joule surge suppression rating
Reliable Battery Backup
Supports half load up to 19 min. and full load up to 7 min.
Internal batteries designed for hot-swap field replacement
95% line-power efficiency rating saves money in energy costs
Cold-start capability enables turn-on in battery mode during blackouts
Automatic Voltage Regulation (AVR)
Maintains selectable 100V, 110V or 120V nominal output over input range of 83V-145V without using battery power
EMI/RFI Line Noise Filtering
Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance
LED Indicators
Front-panel LEDs signal indicate line power, battery power, overload, voltage regulation and battery status
Network Management Cards
Compatible with Tripp Lite UPS management card options WEBCARDLX, SNMPWEBCARD and RELAYIOCARD
Communication Ports
USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from www.tripplite.com/poweralert
Telephone/Network Jacks
Protect against power surges over telephone/DSL or network Ethernet lines
- Corrects under- and overvoltages from 83V to 145V
- 8 NEMA 5-15R outlets
- Front-panel LEDs indicate load, power, voltage and battery statuses
- Network power management and control capability
- 19 min. runtime at half load; 7 min. at full load
- Experience higher efficiency with lower energy cost
- Up to 7 minute runtime on full load to preserve critical data from power shortage interruptions
- 650 W load capacity - backup power for your valuable electronics
- 1050 VA load capacity provides sufficient backup during power failures
- 4 Hour typical battery recharge time to allow uninterrupted usage without requiring power outlet
- Lead Acid battery chemistry to better suit your requirements with maximum productivity
- NEMA 5-15P plug/connector type for a secure, feasible operation
- NEMA 5-15R receptacle type offers ease of operation with maximum efficiency
- 100 V AC input voltage for optimal performance with maximum usability
- 100 V AC output voltage for better reliance and maximum usability
Product Specifications
-
Additional InformationSMART1050SLT line-interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts and overvoltages, plus network-grade AC surge suppression Automatic Voltage Regulation (AVR) circuits maintain user-selectable 100, 110, 120 or 127V nominal output over an input voltage range of 91-145V Includes 8 fully-protected NEMA 5-15R output receptacles arranged in a single load bank that can be powered off and back on again via software interface Offers simultaneous monitoring of up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software. Free PowerAlert enterprise managment software is also available for select opportunities Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for scheduled or immediate reboot of connected equipment Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW) 15 LEDs offer continuous detailed status information of UPS operating parameters and site power quality Hot-swappable batteries allow on-site battery replacement without powering off connected equipment UL (USA), cUL (Canada), NOM (Mexico), FCC Class B (Emissions) Listed 2 year warranty with up to $250,000 connected equipment insurance 1050VA / 650 watt power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic devices Large internal batteries offer runtimes of 19 minutes at half load (525VA / 325 watts) and 7 minutes at full load (1050VA / 650 watts) PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user-defined script commands
-
AlarmOn Battery Overload
-
Battery ChemistryLead Acid
-
Battery Life6 Year
-
Brand NameTripp Lite by Eaton
-
Certifications & StandardsUL1778 (USA), cUL (Canada), FCC Class B (emissions), IEC 1000-4-2 Level 3 (Electrostatic Discharge), IEC 1000-4-4 Level 2 (Fast Transient / Burst), IEC 1000-4-5 Level 3 (Lightning Surge), Conforms to IEEE 587 / ANSI C62.41 specifications
-
Cord Length6 ft
-
Country of OriginChina
-
Depth13.2"
-
Form FactorTower
-
Height10.2"
-
Hot SwappableYes
-
Input Voltage110 V AC 100 V AC 120 V AC
-
Limited Warranty3 Year
-
Load Capacity (VA)1050 VA
-
Load Capacity (Watt)650 W
-
Manufacturer Part NumberSMART1050SLT
-
Maximum Operating Temperature104°F (40°C)
-
Network ManagementSNMP Manageable
-
Output Voltage120 V AC 100 V AC 110 V AC
-
Package ContentsSMART1050SLT SmartPro 120V 1.05kVA 650W Line-Interactive Sine Wave UPS USB cable DB9 cable PowerAlert software Owner's manual
-
Plug/Connector TypeNEMA 5-15P
-
Product LineSmartPro
-
Product NameSMART1050SLT SmartPro 120V 1.05kVA 650W Line-Interactive Sine Wave UPS
-
Product TypeLine-interactive UPS
-
Receptacle Detail8 x NEMA 5-15R
-
Receptacle TypeNEMA 5-15R
-
Status IndicatorsIncludes 14 front panel LEDs to indicate line / battery power status, over / under voltage correction, battery charge level (4 LEDs), load percentage (4 LEDs), overload and replace battery. Also includes 1 rear panel site wiring fault indicator.
-
Typical Battery Recharge Time4 Hour
-
USBYes
-
Waveform TypeSine Wave
-
Width6.8"