Tripp Lite UPS Smart 500VA 300W Rackmount AVR 120V USB DB9 SNMP 1URM

Product Specifications

• Additional Information
  500VA / 300 watt power handling capability compatibile with networking, telecom and other sensitive electronic devices SMART500RT1U line interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts, plus network-grade AC surge suppression Supports 1U rackmount installation in 2 or 4 post rack enclosures, upright tower placement also supported - mounting accessories included Large internal batteries offer runtimes of 17 minutes at half load (250VA / 150 watts) and 5 minutes at full load (500VA / 300 watts) Maintains regulated 120V nominal output during brownouts as low as 90V Includes 6 UPS-supported outlets, with one single outlet load bank that can be powered off and back on again via software interface. One additional surge-only outlet powers accessories not requiring battery support PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user-defined script commands Offers simultaneous monitoring by up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software. Free PowerAlert enterprise management software is also available for select opportunities Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for scheduled or immediate reboot of connected devices Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW) Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter Emergency Power Off (EPO) interface with cable Multi-function audible alarms and set of 5 front panel LEDs Network-grade AC surge suppression Attractive all-black color scheme UPS battery set ships fully assembled and ready for installation, no time consuming connection of internal batteries by user is necessary Two year warranty with $250,000 connected equipment insurance (USA & Canada only)
• Alarm
  On Battery Overload UPS Fault Low Battery
• Backup/Run Time
  0.08 Hour 353.55 W Full Load 0.28 Hour 176.78 W Half Load
• Battery Chemistry
  Sealed Lead Acid (SLA)
• Brand Name
  Tripp Lite
• Color
  Black
• Cord Length
  10 ft
• Depth
  11.8"
• Emergency Power OFF
  Yes
• Form Factor
  Rack/Tower
• Hot Swappable
  Yes
• Input Voltage
  120 V AC
• Limited Warranty
  2 Year
• Load Capacity
  500 VA/300 W
• Manufacturer
  Tripp Lite
• Manufacturer Part Number
  SMART500RT1U
• Manufacturer Website Address
  www.tripplite.com
• Maximum Operating Temperature
  122°F (50°C)
• Network Management
  SNMP Manageable
• Output Voltage
  120 V AC
• Package Contents
  Mounting hardware Cabling for USB & DB9 monitoring and EPO switching PowerAlert unattended shutdown and UPS/Power monitoring software Warranty information and instruction manual SMART500RT1U UPS System
• Plug/Connector Type
  NEMA 5-15P
• Product Line
  SmartPro
• Product Name
  SmartPro 500VA Rack/Tower UPS
• Product Type
  Line-interactive UPS
• Rack Height
  1U
• Receptacles
  7 x NEMA 5-15R
• Serial Port
  Yes
• Shipping Dimensions
  5" Height x 22.50" Width x 16" Depth
• Software Included
  PowerAlert Software
• Status Indicators
  5 front panel LEDs - Green POWER LED, 3 color BATTERY CHARGE LED, 3 color OUTPUT LOAD LEVEL LED, red BATTERY WARNING LED.
• Surge Energy Rating
  480 J
• System Requirements
  TYPICAL APPLCIATIONS: Ideal for protection of fileservers, network accessories and telecommunications equipment in server rooms, internetworking closets, co-location racks, kiosks and a variety of other locations. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems.
• Temperature
  32?F (0?C) to 104?F (40?C) Operating 5?F (-15?C) to 122?F (50?C)
• Transfer Time
  4 ms
• Typical Battery Recharge Time
  4 Hour
• USB
  Yes
• Waveform Type
  Pulse-width Modulated Sine Wave
• Weight (Approximate)
  18.80 lb
• Width
  17.5"