Pinch to zoom

Eaton Tripp Lite Series SmartPro 3000VA 3000W 208V Line-Interactive Sine Wave UPS - 10 Outlets, Extended Run, Network Card Option, LCD, USB, DB9, 2U Rack/Tower - Battery Backup

2U Rack/Tower - 5 Hour Recharge - 3.90 Minute Stand-by - 230 V AC Input - 230 V AC Output - Serial Port - USB - 8 x IEC 60320 C13, 1 x IEC 60320 C19
Product Number: SYNX3886602
  • Provides safe and reliable sine wave power to high-end server and network equipment used in SMB, Edge network and enterprise environments
  • Delivers stable sine wave output in battery mode compatible with sensitive equipment
  • Corrects brownouts and overvoltages without switching to battery power
  • Unity power factor ensures maximum power possible at each power rating
More details
Sold Out

This product is sold out and we do not know when we will be getting another shipment. We apologize for any inconvenience this may cause.

Check similar items above to see if a replacement product is available.

Product Description

Eaton Tripp Lite Series SmartPro 3000VA 3000W 208V Line-Interactive Sine Wave UPS - 10 Outlets, Extended Run, Network Card Option, LCD, USB, DB9, 2U Rack/Tower - Battery Backup - 3kVA/3kW/208V Battery Backup for Distributed IT, Telecom or Enterprise Deployments
The SMX3000XLRT2UA provides reliable battery backup and AC power protection for connected devices against blackouts, brownouts, surges and line noise. Unity power factor ensures the most watts possible at each power rating, so you can connect more equipment. Pure sine wave power and unity power factor, even when on battery, means this SmartPro UPS can be used with sensitive IT equipment, including servers, VoIP phones, data storage and PoE switches. Even if the battery is depleted, the UPS will automatically restart when the power comes back on after an extended outage.
Reliable, Expandable Battery Backup Keeps You Operational Through Power Outages
The field-replaceable, hot-swappable VRLA battery modules allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. Extra runtime is available by connecting up to four optional extended battery modules (BP72VRM2U, sold separately).
Outlets Protect Your Connected Components
Eight C13 and two C19 outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. Five outlets are grouped into two load banks that let you shed non-critical loads to extend runtime for critical loads. Front and rear cooling fans help protect equipment from overheating.
Optional LX Platform Network Management Card Allows Remote Access 24/7
The WEBCARDLXE network interface (sold separately) enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. The IP-based Auto Probe feature ensures continuous network uptime by communicating with other network devices, detecting lost connectivity and automatically rebooting IT equipment. Optional EnviroSense2 modules (E2MT, E2MTDO and E2MTHDI, all sold separately) provide a variety of environmental monitoring and control options.
Intuitive Front-Panel Interface for Convenient UPS Operation and Monitoring
The two-line front-panel LCD monitoring screen features 10 selectable screens that allow quick access to a wide range of detailed UPS and site power information. LEDs show UPS status: a green light means utility power is on, an orange light means the UPS is in battery mode and a red light indicates an active alarm or fault. The control panel rotates to accommodate both rack-mount and tower configurations.
Automatic Voltage Regulation (AVR) Corrects Low- and High-Voltage Conditions
AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. The SMX3000XLRT2UA maintains regulated 208V nominal output during brownouts and overvoltages from 160V to 294V while keeping the battery fully charged and ready to take over in case of power failure.
Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better
This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.

  • Provides safe and reliable sine wave power to high-end server and network equipment used in SMB, Edge network and enterprise environments
  • Delivers stable sine wave output in battery mode compatible with sensitive equipment
  • Corrects brownouts and overvoltages without switching to battery power
  • Unity power factor ensures maximum power possible at each power rating
  • ENERGY STAR 2.0-certified to save electricity, lower costs and protect the environment
  • WEBCARDLXE network interface (sold separately) allows 24/7 remote access and control
  • 2-year warranty, 3 year with registration. Note: Registration is required for 3-year warranty.
  • Line-interactive UPS provides optimal and uninterrupted power supply for maximum usability
  • Keep your sensitive devices powered with a backup of up to 3.90 minute at full load
  • 2700 W load capacity - backup power for your valuable electronics
  • 3000 VA load capacity - work without any interruption during power outages
  • Brownout protection type provides optimal power supply output with added usability
  • 5 Hour typical battery recharge time to allow uninterrupted usage without requiring power outlet
  • IEC 60320 C20 plug/connector type for convenient usage with added dependability
  • IEC 60320 C13 receptacle type offers maximum safety, convenience, and increased usability
  • 230 V AC input voltage for optimal performance with maximum usability
  • 230 V AC output voltage for maximum dependability and added productivity
Tripp Lite by Eaton logo
Guides & Information
Related Articles
 Need more information? Ask a Question

Product Specifications

  • Alarm
    Low Battery Overload Power Failure Remote Shutdown UPS Fault UPS StartUp
  • Brand Name
    Tripp Lite by Eaton
  • Certifications & Standards
    CE IEC 62040-1 IEC 62040-2 Class A EMI GOST
  • Country of Origin
    China
  • Depth
    19.5"
  • Emergency Power OFF
    Yes
  • Environmentally Friendly
    Yes
  • Form Factor
    Rack/Tower
  • Height
    3.5"
  • Hot Swappable
    Yes
  • Input Current
    14.10 A
  • Input Voltage
    230 V AC
  • Limited Warranty
    2 Year
  • Load Capacity (VA)
    3000 VA
  • Load Capacity (Watt)
    2700 W
  • Manufacturer Part Number
    SMX3000XLRT2UA
  • Maximum Operating Temperature
    104°F (40°C)
  • Network Management
    SNMP Manageable
  • Output Voltage
    230 V AC
  • Package Contents
    SMX3000XLRT2UA UPS System PowerAlert Software CD 4 Post Rackmount Installation Kit 3 x C13/C14 Power Cables Instruction Manual USB Cable DB9 Cable EPO Cable
  • Plug/Connector Type
    IEC 60320 C20
  • Product Line
    SmartPro
  • Product Model
    SMX3000XLRT2UA
  • Product Name
    SMX3000XLRT2UA UPS System
  • Product Type
    Line-interactive UPS
  • Protection Type
    Black Out Brownout EMI / RFI Over Voltage Surge Under Voltage
  • Rack Height
    2U
  • Receptacle Detail
    1 x IEC 60320 C19 8 x IEC 60320 C13
  • Receptacle Type
    IEC 60320 C13 IEC 60320 C19
  • Serial Port
    Yes
  • Software Included
    PowerAlert Monitoring Software
  • Status Indicators
    Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options
  • Surge Energy Rating
    350 J
  • Thermal Dissipation
    46.31 W
  • Typical Battery Recharge Time
    5 Hour
  • USB
    Yes
  • Waveform Type
    Sine Wave
  • Width
    17.5"

Reviews

Question and Answer

Mystery Coupon Offer
Save big on your first order!