Tripp Lite by Eaton UPS TAA-Compliant SmartPro 120V 3kVA 2.88kW Line-Interactive Sine Wave UPS 2U Rack/Tower Extended Run Pre-Installed WEBCARDLX Network Interface LCD USB DB9 Serial
- Federal Trade Agreements Act / TAA Compliant for GSA Schedule purchases
- 3kVA / 3000VA / 2880W line interactive 2U rack/tower UPS; 0.96 power factor
- 120V nominal output during brownouts to 83V and overvoltages to 145V
- Interactive LCD provides UPS status information and advanced configuration options
This product is sold out and we do not know when we will be getting another shipment. We apologize for any inconvenience this may cause.
Check similar items above to see if a replacement product is available.
Product Description
Tripp Lite by Eaton UPS TAA-Compliant SmartPro 120V 3kVA 2.88kW Line-Interactive Sine Wave UPS 2U Rack/Tower Extended Run Pre-Installed WEBCARDLX Network Interface LCD USB DB9 Serial - Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Tripp Lite's unique configuration excels in exceptionally poor-power environments with two separate levels of voltage boost to correct both slight undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 96% line-mode efficiency offers reduced heat emissions and operating costs. Network management interfaces support communications via USB port, DB9 serial port and pre-installed WEBCARDLX network management interface card.
The Java-free HTML5-based WEBCARDLX interface enables full remote access for site power and UPS status monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.
HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. PowerAlert UPS monitoring and auto shutdown software is available via free download. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.
- Federal Trade Agreements Act / TAA Compliant for GSA Schedule purchases
- 3kVA / 3000VA / 2880W line interactive 2U rack/tower UPS; 0.96 power factor
- 120V nominal output during brownouts to 83V and overvoltages to 145V
- Interactive LCD provides UPS status information and advanced configuration options
- Expandable runtime, Hot-swap batteries, 96% efficiency, Sine wave output
- USB, RS232 & EPO ports, Pre-installed SNMPWEBCARD interface
- NEMA L5-30P input; 8 NEMA 5-15/20R & 1 L5-30R outlets
- Works adequately in situations where the supply is prone to sags and surges
- Up to 3 minute runtime on full load to preserve critical data from power shortage interruptions
- 2880 W load capacity - backup power for your valuable electronics
- 3000 VA load capacity - work without any interruption during power outages
- EMI protection type provides optimal power supply output with added usability
- 5 Hour typical battery recharge time to allow optimal performance for longer hours with added efficiency
- NEMA L5-30P plug/connector type for convenient usage with added dependability
- NEMA 5-15/20R receptacle type offers ease of operation with maximum efficiency
- 120 V AC input voltage for better reliance and maximum dependability
- 120 V AC output voltage for optimal performance with maximum feasibility
Product Specifications
-
AlarmLow Battery Overload Power Failure Remote Shutdown UPS Fault UPS StartUp
-
Brand NameTripp Lite by Eaton
-
Certifications & StandardsUL1778 CSA NOM FCC Part 15 EMI TAA Compliant
-
Circuit BreakerYes
-
Cord Length10 ft
-
Country of OriginTaiwan
-
Depth19"
-
Emergency Power OFFYes
-
Environmentally FriendlyYes
-
Form FactorRack-mountable Rack/Tower
-
Height3.5"
-
Hot SwappableYes
-
Input Current24 A
-
Input Voltage120 V AC
-
Limited Warranty2 Year
-
Load Capacity (VA)3000 VA
-
Load Capacity (Watt)2880 W
-
Manufacturer Part NumberSM3000RMXLNTAA
-
Maximum Operating Temperature104°F (40°C)
-
Network ManagementSNMP Manageable
-
Output Current20 A
-
Output Voltage120 V AC
-
Package ContentsSmartPro SM3000RMXLNTAA 3000 VA Tower/Rack-mountable UPS 4 x Post Rackmount Installation Kit USB, Serial & EPO Cabling Instruction Manual
-
Plug/Connector TypeNEMA L5-30P
-
Product LineSmartPro
-
Product ModelSM3000RMXLNTAA
-
Product NameSmartPro SM3000RMXLNTAA 3000 VA Tower/Rack-mountable UPS
-
Product TypeLine-interactive UPS
-
Protection TypeBlack Out Brownout EMI Over Voltage RFI Surge Under Voltage
-
Rack Height2U
-
Receptacle Detail1 x NEMA L5-30R 8 x NEMA 5-15/20R
-
Receptacle TypeNEMA 5-15/20R NEMA L5-30R
-
Serial PortYes
-
Software IncludedPowerAlert Software
-
Surge Energy Rating570 J
-
Typical Battery Recharge Time5 Hour
-
USBYes
-
Waveform TypePure Sine Wave
-
Width17.5"