APC by Schneider Electric Switched 48-Outlet PDU
- With a built-in digital current meter avoid potential overloads via switched PDUs
- IEC 60320 C13 receptacle type to ensure maximum productivity with added feasibility
- IEC 60309 3P+PE 60A plug/connector type for better, dependable connectivity and desired power output
- 230 V AC input voltage for maximum feasibility and added productivity
This product is sold out and we do not know when we will be getting another shipment. We apologize for any inconvenience this may cause.
Check similar items above to see if a replacement product is available.
Product Description
APC by Schneider Electric Switched 48-Outlet PDU - Rack PDU 2G, Switched, ZeroU, 17.2kW, 208V, (42) C13, (6) C19
APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.
- With a built-in digital current meter avoid potential overloads via switched PDUs
- IEC 60320 C13 receptacle type to ensure maximum productivity with added feasibility
- IEC 60309 3P+PE 60A plug/connector type for better, dependable connectivity and desired power output
- 230 V AC input voltage for maximum feasibility and added productivity
- 208 V AC output voltage for better reliance and maximum usability
Product Specifications
-
Brand NameAPC by Schneider Electric
-
Depth2"
-
Environmentally FriendlyYes
-
Form FactorTower
-
Height72"
-
Input Current60 A
-
Input Voltage230 V AC
-
Limited Warranty2 Year
-
Manufacturer Part NumberAP8967
-
Mount TypeRack-mountable
-
Output Voltage208 V AC
-
Package ContentsSwitched 48-Outlet PDU Installation guide Rack mounting brackets Safety guide Serial configuration cable
-
Plug/Connector Detail1 x IEC 60309 3P+PE 60A
-
Plug/Connector TypeIEC 60309 3P+PE 60A
-
Power Rating (Watt)17.20 kW
-
Product NameSwitched 48-Outlet PDU
-
Product SeriesSwitched
-
Product TypePDU
-
Protection TypeOverload Protection
-
Rack Height0U
-
Receptacle Detail42 x IEC 60320 C13 6 x IEC 60320 C19
-
Receptacle TypeIEC 60320 C13 IEC 60320 C19
-
Width2.2"