Pinch to zoom

Tripp Lite by Eaton PDU 3.7kW Single-Phase 208/230V Monitored PDU - LX Platform 20 C13 4 C19 Outlets C20 Input with L6-20P Adapter 0U 1778mm Height TAA

Monitored - 20 x IEC 60320 C13, 4 x IEC 60320 C19 - 230 V AC - Network (RJ-45) - 0U - Vertical - MountRack-mountable - TAA Compliant
Product Number: SYNX5061187
  • 3.3-3.7kW 208/230V single-phase monitored 0U PDU
  • 24 outlets-20 C13, 4 C19-with plug-lock insert sleeves
  • Built-in Java-free LX Platform interface for remote access 24/7
  • Digital ammeter for on-site load monitoring in real time
More details
Sold Out

This product is sold out and we do not know when we will be getting another shipment. We apologize for any inconvenience this may cause.

Check similar items above to see if a replacement product is available.

Product Description

Tripp Lite by Eaton PDU 3.7kW Single-Phase 208/230V Monitored PDU - LX Platform 20 C13 4 C19 Outlets C20 Input with L6-20P Adapter 0U 1778mm Height TAA - The PDUMNV20HVLX 3.3-3.7kW Single-Phase Monitored PDU provides real-time remote monitoring of voltage, frequency and load levels via built-in network connection. Recommended for your IT or industrial application, the 0U PDU features 24 outlets (20 C13 and 4 C19) with included plug-lock insert sleeves to prevent cables from becoming accidentally disconnected. The C20 inlet is compatible with a wide variety of user-supplied power cords for connecting to an AC source, generator or protected UPS. A detachable 10-foot cord with NEMA L6-20P plug is included.
The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.
A digital ammeter allows you to monitor the total connected load in real time to ensure it remains well below maximum capacity with no danger of overload. The PDU mounts in 0U of space in EIA-standard 19-inch racks using the included toolless mounting buttons or the included rack-mounting brackets. Use the included PDUMVROTATEBRKT kit to install the unit with outlets facing the rear for better airflow or equipment access.
Features
Distributes and Monitors Network-Grade AC Power
3.3-3.7kW 208/230V 20A monitored PDU with single-phase input
C20 inlet compatible with wide variety of user-supplied power cords
Detachable 10 ft. cord with NEMA L6-20P plug included
Firmware upgrades support future product enhancements
20 C13 and 4 C19 Outlets Distribute AC Power
Included plug-lock inserts prevent cables from becoming accidentally disconnected
Digital Ammeter
Reports total connected equipment load in real time
Supports IP-address self-ID
Rotates 180° for easy reading at either angle
Built-In LX Platform Interface
Allows full remote access for power monitoring with email notifications via secure web browser, SNMP, telnet or SSH
Supports 10/100 Mbps auto-sensing for communication with an Ethernet network
Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities
No Java required
Broad Communications Compatibility
Supports IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP
Supports automatic and manual assignment of IP address
Easy 0U Installation in EIA-Standard 19 in. Racks
Mounts vertically using included toolless buttons or rack-mounting brackets
Included PDUMVROTATEBRKT allows mounting with rear-facing outlets
TAA-Compliant
Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

  • 3.3-3.7kW 208/230V single-phase monitored 0U PDU
  • 24 outlets-20 C13, 4 C19-with plug-lock insert sleeves
  • Built-in Java-free LX Platform interface for remote access 24/7
  • Digital ammeter for on-site load monitoring in real time
  • C20 inlet input with detachable 10 ft. NEMA L6-20P power cord
  • PDU improves efficiency, uptime and growth of data centers
  • With monitored PDU, you can remotely monitor single-or three-phase voltage easily to ensure maximum power supply efficiency
  • IEC 60320 C13 receptacle type to ensure maximum usability and reliable power output
  • Single Phase phase PDU provides optimal power output with added usability
  • 230 V AC input voltage for better reliance and maximum dependability
  • 230 V AC output voltage for maximum dependability and added productivity
Tripp Lite by Eaton logo
Guides & Information
Related Articles
 Need more information? Ask a Question

Product Specifications

  • Brand Name
    Tripp Lite by Eaton
  • Country of Origin
    Taiwan
  • Depth
    2.6"
  • Environmentally Friendly
    Yes
  • Height
    70"
  • Input Current
    16 A
  • Input Voltage
    230 V AC
  • Limited Warranty
    2 Year
  • Management
    IPv4 IPv6 HTTP HTTPS SMTP SNMPv1 SNMPv2 SNMPv3 telnet SSH FTP DHCP and NTP
  • Manufacturer Part Number
    PDUMNV20HVLX
  • Mount Type
    Rack-mountable
  • Mounting Orientation
    Vertical
  • Network (RJ-45)
    Yes
  • Output Voltage
    230 V AC
  • Package Contents
    PDUMNV20HVLX 3.3-3.7kW Single-Phase Monitored PDU Built-in LX Platform Interface Detachable NEMA L6-20P to C19 Power Cord, 10 ft Configuration Cable 24 x Plug-lock Inserts Rack-mounting Hardware PDUMVROTATEBRKT Mounting Bracket Accessory Owner's Manual
  • Phase
    Single Phase
  • Power Rating (Watt)
    3700 W
  • Product Model
    PDUMNV20HVLX
  • Product Name
    PDUMNV20HVLX 3.3-3.7kW Single-Phase Monitored PDU
  • Product Type
    PDU
  • Rack Height
    0U
  • Receptacle Detail
    20 x IEC 60320 C13 4 x IEC 60320 C19
  • Receptacle Type
    IEC 60320 C13 IEC 60320 C19
  • Width
    2.2"

Reviews

Question and Answer

Mystery Coupon Offer
Save big on your first order!