Tripp Lite by Eaton 5.5kW Single-Phase Monitored PDU with LX Platform Interface, 208/230V Outlets (20 C13 & 4 C19), L6-30P, 0U, TAA
- 5/5.8kW 208/240V 30A monitored PDU
- 24 outlets-20 C13, 4 C19-with cord retention brackets
- NEMA L6-30P input with 10 ft. AC power cord
- Digital ammeter for on-site load monitoring in real time
This product is sold out and we do not know when we will be getting another shipment. We apologize for any inconvenience this may cause.
Check similar items above to see if a replacement product is available.
Product Description
Tripp Lite by Eaton 5.5kW Single-Phase Monitored PDU with LX Platform Interface, 208/230V Outlets (20 C13 & 4 C19), L6-30P, 0U, TAA - The PDUMNV30HVLX 5.8kW Single-Phase Monitored PDU provides real-time remote monitoring of voltage, frequency and load levels via built-in network connection. Recommended for any IT or industrial application, it features 24 outlets (20 C13 and 4 C19) with included cord retention brackets to prevent cables from becoming accidentally disconnected. A 10-foot cord with NEMA L6-30P plug connects the PDU to a compatible AC power source, generator or protected UPS.
The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.
A digital ammeter allows you to monitor each bank's load in real time to ensure it remains well below maximum capacity with no danger of overload. The PDU mounts in 0U of space in EIA-standard 19-inch racks using the included toolless mounting buttons or the included rack-mounting brackets. Use the included PDUMVROTATEBRKT kit to install the unit with outlets facing the rear for better airflow or equipment access.
- 5/5.8kW 208/240V 30A monitored PDU
- 24 outlets-20 C13, 4 C19-with cord retention brackets
- NEMA L6-30P input with 10 ft. AC power cord
- Digital ammeter for on-site load monitoring in real time
- Built-in LX Platform interface for remote access
- PDU provides active metering enabling energy optimization and circuit protection
- With monitored PDU, you can remotely monitor single-or three-phase voltage easily to ensure maximum power supply efficiency
- IEC 60320 C13 receptacle type to ensure maximum usability and reliable power output
- Single Phase phase PDU for reliable performance with maximum productivity
- NEMA L6-30P plug/connector type for better, dependable connectivity and desired power output
- 230 V AC input voltage for maximum feasibility and added productivity
- 200 V AC output voltage for better reliance and maximum usability
Product Specifications
-
Brand NameTripp Lite by Eaton
-
Country of OriginTaiwan
-
Depth2.7"
-
Environmentally FriendlyYes
-
Height70"
-
Input Current30 A
-
Input Voltage230 V AC
-
Input Voltage Range200 V AC - 240 V AC
-
Limited Warranty2 Year
-
ManagementHTTP HTTPS SNMPv1 SNMPv2 SNMPv3 telnet SSH FTP DHCP NTP
-
Manufacturer Part NumberPDUMNV30HVLX
-
Mount TypeRack-mountable
-
Mounting OrientationVertical
-
Output Voltage200 V AC 208 V AC 240 V AC
-
Package ContentsPDUMNV30HVLX 5/5.8kW Single-Phase Monitored PDU Configuration cable 24 x Cable ties 2 x Cord retention brackets Rack-mounting hardware PDUMVROTATEBRKT mounting bracket accessory Owner's manual
-
PhaseSingle Phase
-
Plug/Connector TypeNEMA L6-30P
-
Power Rating (Watt)5800 W
-
Product NamePDUMNV30HVLX 5/5.8kW Single-Phase Monitored PDU
-
Product TypePDU
-
Rack Height0U
-
Receptacle Detail20 x IEC 60320 C13 4 x IEC 60320 C19
-
Receptacle TypeIEC 60320 C13 IEC 60320 C19
-
Width2.2"