Tripp Lite by Eaton 5.5kW Single-Phase Switched PDU - LX Interface, 208/230V Outlets (20 C13 & 4 C19), L6-30P, 0U, TAA
- 5/5.8kW 208/240V 30A switched PDU
- 24 individually controllable outlets-20 C13, 4 C19
- Built-in LX Platform interface for remote access
- Digital ammeter for on-site load monitoring in real time
This product is sold out and we do not know when we will be getting another shipment. We apologize for any inconvenience this may cause.
Check similar items above to see if a replacement product is available.
Product Description
Tripp Lite by Eaton 5.5kW Single-Phase Switched PDU - LX Interface, 208/230V Outlets (20 C13 & 4 C19), L6-30P, 0U, TAA - The PDUMV30HVNETLX 5/5.8kW Single-Phase Switched PDU provides advanced network control and remote power monitoring with the ability to turn on, turn off, reboot or lock out power to each outlet. Recommended for any IT or industrial application, it features 24 switched outlets (20 C13 and 4 C19). LEDs indicate each outlet's on/off power status. A 10-foot cord with NEMA L6-30P plug connects the PDU to a compatible AC power source, generator or protected UPS.
The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.
A digital ammeter allows you to monitor each bank's load in real time to ensure it remains well below maximum capacity with no danger of overload. The PDU mounts in 0U of space in EIA-standard 19-inch racks using the included toolless mounting buttons or the included rack-mounting brackets. Use the included PDUMVROTATEBRKT kit to install the unit with outlets facing the rear for better airflow or equipment access.
More from the Manufacturer
- 5/5.8kW 208/240V 30A switched PDU
- 24 individually controllable outlets-20 C13, 4 C19
- Built-in LX Platform interface for remote access
- Digital ammeter for on-site load monitoring in real time
- NEMA L6-30P input with 10 ft. AC power cord
- PDU is reliable for power protection and management solutions
- With a built-in digital current meter avoid potential overloads via switched PDUs
- IEC 60320 C19 receptacle type to ensure maximum dependability and optimal performance
- Single Phase phase PDU for reliable performance with maximum productivity
- NEMA L6-30P plug/connector type for efficient connectivity and feasible power output
- 230 V AC input voltage for optimal performance with maximum usability
- 230 V AC output voltage for better reliance and maximum usability
Product Specifications
-
Brand NameTripp Lite by Eaton
-
Country of OriginTaiwan
-
Depth2.7"
-
Environmentally FriendlyYes
-
Height70"
-
Input Current30 A
-
Input Voltage230 V AC
-
Limited Warranty2 Year
-
ManagementProtocols: HTTP HTTPS SMTP SNMPv1 SNMPv2 SNMPv3 telnet SSH FTP DHCP NTP
-
Manufacturer Part NumberPDUMV30HVNETLX
-
Mount TypeRack-mountable
-
Mounting OrientationVertical
-
Output Voltage230 V AC
-
Package ContentsPDUMV30HVNETLX 24-Outlet PDU Configuration Cable 24 x Cable Ties 2 x Cord Retention Brackets Rack-mounting Hardware Mounting Bracket Accessory Owner's Manual
-
PhaseSingle Phase
-
Plug/Connector TypeNEMA L6-30P
-
Power Rating (Watt)5800 W
-
Product ModelPDUMV30HVNETLX
-
Product NamePDUMV30HVNETLX 24-Outlet PDU
-
Product TypePDU
-
Protection TypeOverload Protection
-
Rack Height0U
-
Receptacle Detail20 x IEC 60320 C13 4 x IEC 60320 C19
-
Receptacle TypeIEC 60320 C13 IEC 60320 C19
-
Width2.2"