Tripp Lite by Eaton PDU 2.9kW Single-Phase Monitored PDU with LX Platform Interface 120V Outlets (24 5-15/20R) L5-30P Plug 0U Vertical TAA
- 2.9kW 120V single-phase monitored 0U PDU
- 24 NEMA 5-15/20R outlets with cord retention brackets
- Built-in Java-free LX Platform interface for 24/7 remote access
- Digital ammeter for on-site load monitoring in real time
This product is sold out and we do not know when we will be getting another shipment. We apologize for any inconvenience this may cause.
Check similar items above to see if a replacement product is available.
Product Description
Tripp Lite by Eaton PDU 2.9kW Single-Phase Monitored PDU with LX Platform Interface 120V Outlets (24 5-15/20R) L5-30P Plug 0U Vertical TAA - The PDUMNV30LX 2.9kW Single-Phase Monitored PDU provides real-time remote monitoring of voltage, frequency and load levels via built-in network connection. Recommended for IT and industrial applications, the vertical PDU features 24 NEMA 5-15/20R outlets with included cord retention brackets to prevent cables from becoming accidentally disconnected. A 10-foot cord with NEMA L5-30P plug connects the PDU to a compatible AC power source, generator or protected UPS.
The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.
A digital ammeter allows you to monitor power consumption for both breakered load banks, as well as the total load to ensure they remain well below maximum capacity with no danger of overload. The PDU mounts in 0U of space in EIA-standard 19-inch racks using the included toolless mounting buttons or the included rack-mounting brackets. Use the included PDUMVROTATEBRKT kit to install the unit with outlets facing the rear for better airflow or equipment access.
Features
Distributes and Monitors Network-Grade AC Power
2.9kW 120V 20A monitored PDU with single-phase input
NEMA L5-30P with 10 ft. cord connects to compatible AC power source
Firmware upgrades support future product enhancements
24 NEMA 5-15/20R Outlets Distribute Power
Cord retention brackets prevent cables from becoming accidentally disconnected
Digital Ammeter
Reports power consumption for both breakered load banks, plus total output current
Supports IP-address self-ID
Rotates 180° for easy reading at either angle
Built-In LX Platform Interface
Allows full remote access for power monitoring with email notifications via secure web browser, SNMP, telnet or SSH
Supports 10/100 Mbps auto-sensing for communication with an Ethernet network
Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities
No Java required
Broad Communications Compatibility
Supports IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP
Supports automatic and manual assignment of IP address
Easy 0U Installation in EIA-Standard 19 in. Racks
Mounts vertically using included toolless buttons or rack-mounting brackets
Included PDUMVROTATEBRKT allows mounting with rear-facing outlets
TAA-Compliant
Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
- 2.9kW 120V single-phase monitored 0U PDU
- 24 NEMA 5-15/20R outlets with cord retention brackets
- Built-in Java-free LX Platform interface for 24/7 remote access
- Digital ammeter for on-site load monitoring in real time
- NEMA L5-30P input with 10 ft. AC power cord
- PDU allows power to be more efficiently distributed and controlled
- With monitored PDU, you can remotely monitor single-or three-phase voltage easily to ensure maximum power supply efficiency
- NEMA 5-15/20R receptacle type to ensure maximum productivity with added feasibility
- Modular design for better reliability and ensure maximum productivity
- Single Phase phase PDU provides dependable power output with maximum efficiency
- NEMA L5-30P plug/connector type for better, dependable connectivity and desired power output
- 120 V AC input voltage for better reliance and maximum dependability
- 120 V AC output voltage for better reliance and maximum usability
Product Specifications
-
Brand NameTripp Lite by Eaton
-
Country of OriginTaiwan
-
Depth1.8"
-
Environmentally FriendlyYes
-
Height70"
-
Input Current30 A
-
Input Voltage120 V AC
-
Limited Warranty2 Year
-
ManagementIPv4 IPv6 HTTP HTTPS SMTP SNMPv1 SNMPv2 SNMPv3 telnet SSH FTP DHCP NTP
-
Manufacturer Part NumberPDUMNV30LX
-
Mount TypeRack-mountable
-
Mounting OrientationVertical
-
Network (RJ-45)Yes
-
Output Voltage120 V AC
-
Package ContentsPDUMNV30LX 2.9kW Single-Phase Monitored PDU Built-in LX Platform Interface Configuration Cable 24 x Cable ties 2 x Cord retention brackets Rack-mounting hardware PDUMVROTATEBRKT Mounting Bracket Accessory Owner's Manual
-
PhaseSingle Phase
-
Plug/Connector TypeNEMA L5-30P
-
Power Rating (Watt)2880 W
-
Product ModelPDUMNV30LX
-
Product NamePDUMNV30LX 2.9kW Single-Phase Monitored PDU
-
Product TypePDU
-
Protection TypeOverload Protection
-
Rack Height0U
-
Receptacle Detail24 x NEMA 5-15/20R
-
Receptacle TypeNEMA 5-15/20R
-
Remote Outlet SwitchingYes
-
Width2.2"