Pinch to zoom
dbx ZC1 Wall-Mounted Zone Controller
- Programmable Volume Control
- Program or Scene Selection
- Programmable Contact Closure Interface
- Up to 1000 ft. on CAT 5 Cable
$80.00
Loading...
Loading...
Product Description
dbx ZC1 Wall-Mounted Zone Controller - The Zone Controllers offer extended utility to the DriveRack and ZonePRO families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted RJ-45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor.
The ZC-1 provides programmable remote volume control for the DriveRack 220i, 260 and ZonePRO devices.
All information is subject to change without notice.
- Programmable Volume Control
- Program or Scene Selection
- Programmable Contact Closure Interface
- Up to 1000 ft. on CAT 5 Cable
- Programmable Push-To-Talk Paging
- Programmable Source Selection
Need more information?
Ask a Question
Product Specifications
-
Additional InformationConnectors (2) RJ-45 Series Wiring Maximum Cable Length varies with number of Zone Controllers. For Example,Three Zone Controllers: 600 ft. Six Zone Controllers: 300 ft. Parallel Wiring using ZC-BOB Up to Six Zone Controllers: 1000 ft. Parallel Wiring Cable CAT5 or CAT5E with 28.6 Ohm/M (Ohm/1000ft.) nominal DCR and rated VW-1 or higher. Safety Agency Certifications UL 60065, IEC 60065, EN 55013, E60065
-
Brand Namedbx
-
Compatibilitydbx DriveRack 220i, 260 dbx ZonePRO Devices
-
Form FactorWall Mountable
-
Manufacturer Part NumberDBXZC1V
-
Product ModelZC1
-
Product NameZC1 Wall-Mounted Zone Controller
-
Product SeriesZC
-
Product TypeAudio Control Device