Eaton Tripp Lite Series Fiber Optic Mode Conditioning Patch Cable (LC Mode Conditioning to SC), 3M (10 ft.)
- Converts Singelemode LC GBIC to Multimode SC Patch Panel
- 62.5/125 and 8.3/125
- Run 1000Base-LX Gigabit Ethernet over MMF by offsetting signal loss
- Offers a reliable network connectivity
This product is sold out and we do not know when we will be getting another shipment. We apologize for any inconvenience this may cause.
Check similar items above to see if a replacement product is available.
Product Description
Eaton Tripp Lite Series Fiber Optic Mode Conditioning Patch Cable (LC Mode Conditioning to SC), 3M (10 ft.) - Tripp Lites Mode Conditioning Cables are designed for use in Gigabit Ethernet 1000BASE-LX applications. N425-Series cables convert a Singlemode LC GBIC to an SC Multimode patch bay. They are fully compliant with IEEE 802.3z application standards. Mode Conditioning Cables are needed in applications where high-speed Gigabit 1000BASE-LX routers and switches are being deployed into existing Multimode plants. The need for this patch cord is due to the single-mode launch nature of the -LX or long-wave (1300 nm) transceiver modules used for Gigabit Ethernet. Launching a single-mode laser into the center of a multimode fiber can cause multiple signals to be generated that confuses the receiver at the other end of the fiber. These multiple signals, caused by Differential Mode Delay (DMD) effects, severely limit the cable distance lengths for operating Gigabit Ethernet. A mode conditioning patch cord eliminates these multiple signals by allowing the single-mode launch to be offset away from the center of a multimode fiber.
- Converts Singelemode LC GBIC to Multimode SC Patch Panel
- 62.5/125 and 8.3/125
- Run 1000Base-LX Gigabit Ethernet over MMF by offsetting signal loss
- Offers a reliable network connectivity
- Features fiber optic cable type to better accommodate your precise power supply requirements with maximum charging productivity
- Fully compatible with switches
Product Specifications
-
Brand NameTripp Lite by Eaton
-
Cable CharacteristicPatch Cable
-
Cable Length10 ft
-
Cable TypeFiber Optic
-
Connector Type on First EndLC Network - Male
-
Connector Type on Second EndSC Network - Male
-
Connector on First End Details2 x LC Network - Male
-
Connector on Second End Details2 x SC Network - Male
-
Core/Cladding Diameter62.5/125 µm 8.3/125 µm
-
Country of OriginChina
-
Device SupportedNetwork Device Router Switch
-
Environmentally FriendlyYes
-
Fiber Optic ModeMulti-mode Single-mode
-
Limited WarrantyLifetime
-
Manufacturer Part NumberN42503M
-
Product ColorOrange
-
Product ModelN425-03M
-
Product Name3M/10ft Fiber Optic SMF-MMF LC
-
Product TypeNetwork Cable