Pinch to zoom

Tripp Lite by Eaton PDU 3.8kW Single-Phase Switched Automatic Transfer Switch PDU Two 200-240V C20 Inlets 8 C13 & 2 C19 Outputs 1U TAA

10 - 1U Rack-mountable, Zero U Vertical Rackmount TAA"
Product Number: SYNX2719678
  • Single phase 16/20A 200-240V Auto Transfer Switch / ATS PDU
  • Enables redundant A/B power option for non-redundant network devices
  • Built-in LX Platform Network Interface
  • 1U horizontal rackmount; 10 outlets (8 C13 switched / 2 C19 unswitched)
More details
Sold Out

This product is sold out and we do not know when we will be getting another shipment. We apologize for any inconvenience this may cause.

Check similar items above to see if a replacement product is available.

Product Description

Tripp Lite by Eaton PDU 3.8kW Single-Phase Switched Automatic Transfer Switch PDU Two 200-240V C20 Inlets 8 C13 & 2 C19 Outputs 1U TAA - Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Switched PDU features include individually controllable output receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability. Built-in LX Platform network management interface card. The Java-free LX Platform HTML5-based network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.
More from the Manufacturer

  • Single phase 16/20A 200-240V Auto Transfer Switch / ATS PDU
  • Enables redundant A/B power option for non-redundant network devices
  • Built-in LX Platform Network Interface
  • 1U horizontal rackmount; 10 outlets (8 C13 switched / 2 C19 unswitched)
  • Individually switched outlets, network interface and 2 digit visual current meter
  • TAA Compliant
  • PDU provides power control as remote controlled relay & load monitoring
  • Remotely control individual outlets for rebooting of locked equipment with switched PDUs
  • IEC 60320 C13 receptacle type to ensure maximum dependability and optimal performance
  • 230 V AC input voltage for optimal performance with maximum usability
  • 200 V AC output voltage for optimal performance with maximum feasibility
Tripp Lite by Eaton logo
Guides & Information
Related Articles
 Need more information? Ask a Question
Read More

Product Specifications

  • Additional Information
    Input Receptacles: 2 x IEC C20 Output Receptacles: 2 x IEC C19 8 x IEC C13
  • Brand Name
    Tripp Lite by Eaton
  • Country of Origin
    Taiwan
  • Depth
    14.8"
  • Environmentally Friendly
    Yes
  • Height
    1.7"
  • Input Voltage
    230 V AC
  • Limited Warranty
    2 Year
  • Manufacturer Part Number
    PDUMH20HVATNET
  • Mount Type
    Rack-mountable
  • Mounting Orientation
    Vertical
  • Output Voltage
    200 V AC 208 V AC 220 V AC 230 V AC 240 V AC
  • Package Contents
    PDUMH20HVATNET PDU Switched ATS 200V - 240V 16A 10 Outlet User Manual with Warranty Information
  • Product Model
    PDUMH20HVATNET
  • Product Name
    PDUMH20HVATNET PDU Switched ATS 200V - 240V 16A 10 Outlet
  • Product Type
    PDU
  • Rack Height
    1U
  • Receptacle Detail
    2 x IEC 60320 C19 8 x IEC 60320 C13
  • Receptacle Type
    IEC 60320 C13 IEC 60320 C19
  • Width
    17.3"

Reviews

Question and Answer

Mystery Coupon Offer
Save big on your first order!