Diversey Vectra ProX Floor Finish
Product #:
DVO101109988
Product Description
Diversey Vectra ProX Floor Finish
For Hard Floor, Polished Surface, Glazed Surface, Ceramic Tile Floor - Ready-To-Use - Liquid - 640 fl oz (20 quart) - 8.6 pH - Ammonia Scent - Durable, Slip Resistant, Odor Resistant, Low VOC - Opaque Off White - 1 Each
Vectra ProX Floor Finish saves time while giving floors diamond-like brilliance, clarity and durability.
- Provides diamond-like clarity and gloss
- Cures on the floor faster than traditional floor coatings, resulting and time and labor savings
- Resists dirt embedment, black heel marks, scratching and scuffing
- Versatile finish responds well to 175 - 1500 RPM and UHS equipment
- Reduced VOCs of 54.4% results in significantly decreased odors
- Solids content 19%. Product does not contain intentionally added PFAS
- Meets ASTM D-2047 slip resistance requirements
- Perfectly and quickly cleans any household surface
- Leaves behind a pleasant and refreshing ammonia scent
- Floor Finish - Good for hard floor
Loading...
Product Specifications
-
Application/UsageHard Floor Polished Surface Glazed Surface Ceramic Tile Floor
-
Assembly RequiredNo
-
Brand NameDiversey
-
Cleaner FormLiquid
-
Cleaner TypeReady-To-Use
-
Cleaner Volume640 fl oz (20 quart)
-
Country of OriginUnited States
-
Directions/InstructionsBlockade areas to be stripped or finished. Position wet-floor signs around area to be cleaned.Strip floor using recommended Diversey brand stripper according to label directions CoatingApply 2-3 uniform coats using a clean finish mop or the TrailBlazerTM/MC Floor Finish Applicator System. Apply additional coats until desired gloss is obtained.Allow 30 minutes drying time between coats. Temperature, humidity and ventilation may affect drying time. Allow finish to cure for 24 hours before buffing. MaintenanceDust mop or sweepClean the floor with a mop or an automatic scrubber using the recommended Diversey brand cleaner following label directionsIf desired, spray buff using recommended Diversey brand floor maintainer to enhance gloss RecoatingDust mop or sweepDeep scrub floor using Diversey cleaner according to label directionsBlockade area and apply 1-2 uniform coats of finish using a clean finish mop or the Diversey TrailBlazerTM/MC Floor Finish Applicator System. Allow finish to cure for 24 hours before buffing. RemovalRemove using recommended Diversey brand stripper according to label directions Best ResultsDo not diluteDo not use on surfaces colder than 50°F (10°C) @ 15% RHTo avoid contamination, do not return unused product to original container Note: Floors will be slippery when wet or contaminated with foreign materials. Promptly clean-up spills and foreign materials. Meets ASTM D2047 requirements for slip resistance.
-
FeaturesDurable Slip Resistant Odor Resistant Low VOC
-
Manufacturer Part Number101109988
-
Post-consumer-waste%0%
-
Product LineVectra
-
Product NameVectra ProX Floor Finish
-
Product TypeFloor Finish
-
Recommended UseDirt Remover Scratch Remover Black Mark Remover Scuff Mark Remover
-
RecycledNo
-
ScentAmmonia
-
pH8.6